490740
39
Zoom out
Zoom in
Previous page
1/54
Next page
HRS 9100 39
Deutsch
Installation
Einkabellösung (Unicable)
Unicable ist ein Verfahren zur Verteilung von Satelliten-TV-Signalen. Dabei werden mehrere Receiver
an eine einzige Ableitung angeschlossen, was bei Satblock-Verteilung nicht möglich ist. Im Gegen-
satz zu gängigen Einkabelsystemen mit eingeschränkter Programmauswahl steht bei Unicable das
volle Programmspektrum zur Verfügung. Es wird kein komplettes Frequenzband übertragen, sondern
jedem Receiver steht eine bestimmte Frequenz (UserBand UB) im Sat-Frequenzbereich (950–2150
MHz) zur Verfügung. Über spezielle DiSEqC-Signale teilt ein Receiver der Verteileinheit (LNB oder
Multischalter) Ebene und Transponder des gewünschten Programmes mit. Der Transponder wird
dann auf das UserBand des Receivers aufmoduliert. Zum Ansteuern eines Unicable-LNBs sind spe-
zielle DiSEqC-Schaltsignale nötig, weshalb nur DVB-S-Receiver, die diesen Standard unterstützen, in
einem solchen System funktionieren. Grundlage für diese Technik ist eine im Jahre 2004 erlassene
europäische Norm EN 50494.
Unicable LNB
Bei dieser Lösung ist die Unicable-Funktionalität bereits im LNB untergebracht. Derzeit können maxi-
mal 8 Receiver direkt über ein Kabel an das LNB angeschlossen werden. Weitere Verteiler werden
nicht benötigt.
Konfiguration von Unicable-Empfangsanlgen:
Nehmen Sie im Menü ‘Antennenauswahl‘ die Einstellungen für ‘Verbindungsart‘ wie unter
Installation -> Antennenauswahl beschrieben vor. Für Unicable Empfangsanlagen darf jedoch
nur “Single“ oder “DUAL(Different)“ ausgewählt werden!
Abhängig davon, an welchem Anschluss (LNB1 und/oder LNB2) Ihre Unicable-
Empfangsanlage angeschlossen ist, wählen Sie für diesen Anschluss die Option ‘fest instal-
liert
Wechseln Sie in das Menü ‘Satellitenliste‘ und weisen Sie dem Anschluss Ihrer Unicable-
Anlage einen Satelliten zu
Rufen Sie das Menü
‘Antenneneinstellungen‘ auf, wählen Sie
den Tuner/Satelliten für Ihre Unicable-
Empfangsanlage aus
Ändern Sie den Eintrag ‘LNB-Frequenz
auf ‘Unicable(9750-10600)‘. Drücken Sie
die grüne Taste, es erscheint ein Popup
Fenster. Dort müssen Sie die zugehöri-
gen Einstellungen für Ihr Unicable LNB
vornehmen:
IF Kanal 1 bis 8
IF Frequenz 1210, 1420, usw.
Sat. Position A oder B
Die Werte für IF Kanal und der IF Fre-
quenz entnehmen Sie der Beschreibung
des Unicable LNBs. Speichern Sie Ihre
Werte in dem Sie auf das „Speichern“
Feld navigieren und mit OK bestätigen.
Verlassen Sie das Menü
‘Antenneeinstellungen‘ mit der Taste
‘EXIT‘ und fahren sie mit der ‘Einzel-
Satellitensuche‘ fort.
Einstellungen
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro HRS9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro HRS9100 in the language / languages: German as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info