496890
59
Zoom out
Zoom in
Previous page
1/91
Next page
18
First ste
p
s
Channel Search
1. Single connection of dish and receiver
The satellite dish is aligned to a special satellite and you use one LNB. The LNB is directly connected to the satellite
receiver.
After choosing the satellite make sure that only following parameters are defined:
LNB Type: 09750/10/600
LNB voltage: 13/18V
22 KHz: AUTO
Tonebust: None
DiSEqC 1.0: None
DiSEqC 1.2: None
Motor: None
LNB voltage
The LNB for digital programs is usually supplied with 13
and 18V. The option is automatically 13/18V.
The voltage can be changed manually. This directly influences the search results. Possible options
are: OFF, 13V, 18V and 13/18V. If the option OFF is activated the LNB is not
supplied with power any more which inflicts that no programs can be received any more.
22 kHz
By using the 22 kHz signal combined with a universal LNB it is possible to receive the whole ASTRA-satellite system
(analog & digital) with a single 60cm satellite dish. For receiving digital TV and radio only a Set-Top-Box is needed.
The digital TV programs are all arranged in the higher frequency band -> use the option AUTO
The remaining options are explained in the following
configuration steps.
Press the BLUE key to start the program search run.
A new menu appears asking for more
parameters. Define them as follows
Scan mode: TP List, Blind, Network
Crypted: All channels, Free channels
Service Type: All, TV, Radio
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro HRS 8580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro HRS 8580 in the language / languages: English, German as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info