730166

Xiaomi Tecno HR-128D - MiniJ Kokichi Mini Fridge Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
Page 6 of 14
EN
Refrigerator Diagram-- Preparation
p
This dia gram may vary sli ghtly wit h the layout of the refrigerator you have
just urchased due to technical im provements.
Preparation
Unpacking
Remove
all
packing
materials.
Check
attachments
and
materials
Checking
should
be
conducted with reference to the Packing List. Contact the local
distributor
if
discrepancies
are found.
Ensure
proper
location
of
the
refrigerator.
*Make sure the refrigerator is kept upright during handling.If an inclination is required,
it should not exceed 45 degrees. Otherwise the appliance may get damagedresulting
not only in compromised refrigeration performance.
*To avoid product damage or personal injury, the refrigerator should be unpacked
by two persons after it is located in a previously selected position.
*Before installation,make sure the refrigerator has no visible exterior damage.
*When handling the refrigerator, do not lift it by holding the worktop, to prevent
any damage to the refrigerator.
*Do not start up a refrigerator that is damaged.
Clean the refrigerator before use.
(See the following section “Cleaning”)
Idle time
After the refrigerator has been sited and cleaned, let it stand for more than 30 minutes
before connecting the power source.
Version E1.0 of EN 03/2016
Page 9 of 14
Instructions
* Do not store excess quantities or weights of food; food should be stored with spaces in
between for better storage results. Never overload shelves, as they may collapse under
excessive
loads.
* Food to be stored should be sorted according to consumer requirements. Food consumed
daily should be placed in the most convenient area, this will minimize opening periods for
the door. Do not place food too close to the internal walls.
Food holder cleaning
*
Food holders can be taken out for cleaning
Lamp:
*Lamp: 220-240V,15W
Version E1.0 of EN 03/2016
EN
If the interior light in the refrigerator section is not working.
*
Disconnect the appliance from the mains.Switch off at the wall and withdraw the plug from
the socket,or disconnect the mains fuse or remove the screw-out fuse in countries where
this is appliance.
Grasp the lamp cover at the top and at the bottom(1),and pull it forwards to remove(2).
Unscrew the lamp.
Change the lamp.
Screw the new lamp into the connection.Make sure the safety catch is correctly fitted.
Replace the lamp cover,and click it into place at the sides.
4
3
5
4
3
5
1
1
2
Lamp
1.Shelves
2.Vegetable and fruit tray
3.Temperature Controller
4.Egg tray
5.Bottle racks
1
2
3
4
5
6
7
6.Adjustable screw(left)
7.Adjustable (right)screw
7


Need help? Post your question in this forum.

Forumrules
1

Forum

xiaomi-tecno-hr-128d---minij-kokichi-mini-fridge

Reset search

  • There is opwer to the fridge but fridge not working. What to do?
    Submitted on 31-10-2021 at 02:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi Tecno HR-128D - MiniJ Kokichi Mini Fridge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi Tecno HR-128D - MiniJ Kokichi Mini Fridge in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info