Manual Xiaomi Smart Tower Heater Lite (page 6 of 112) (English, German, Dutch, French, Italian, Spanish)

795931

Zoom out

Zoom in

1/112

How to Use

Before Use

On/Standby

Scheduled Standby

Enabling/Disabling Oscillation

Enabling/Disabling the Child Lock

• Check if the heater is in good condition, and make

sure the power cord is not damaged or broken.

• Use a 220–240 V AC electrical outlet with a rated

current of at least 10 A. It is recommended to plug

the power cord into a wall socket, and do not share

the same power strip with other appliances.

• Press the power button on the back of the heater

before use. When the heater makes a notification

sound, it is connected to power.

• This heater is an electric appliance for close use.

When using the heater to blow air directly, it is

recommended to place it one to two meters away

from you for optimal heating performance.

• Press the on/standby button to turn on the heater.

• Press the on/standby button when the heater is

on, the heater will dissipate heat for 30 seconds,

then enter standby mode.

Note: After the heater has been running in the

natural mode for 30 seconds, pressing the on/

standby button can make the heater directly enter

standby mode.

• Press the on/standby button when the heater

is dissipating heat, the heater will return to the

previously used settings.

Note: When planning not to use the heater for a long

time, make sure the heater is in standby mode and

then turn off the heater and unplug the power cord.

• Press the scheduled on/off button to cycle

through the scheduled standby times: one hour,

two hours, four hours, eight hours, and off.

• If no operation is performed within three seconds

after the scheduled standby time is selected, the

indicator will display the expected temperature. If

no expected temperature is set, the indicator will

go out.

• After the scheduled standby time is selected, the

indicator will show the remaining time once you

press the scheduled on/off button. You can press

the button again within three seconds to cycle

through the scheduled standby times.

Note: If the room temperature is higher than

the expected temperature in the constant

temperature mode, the heater may switch to the

natural mode.

• Press the oscillation button to enable or disable

the oscillation mode.

• To enable or disable the child lock function, press

and hold the oscillation button and the mode

button simultaneously for seven seconds.

• The child lock function can also be disabled by

turning on the heater again after disconnecting it

from power or unplugging the power cord.

Switching the Mode

Adjusting the Expected Temperature

• Press the mode button to cycle through the modes

of constant temperature, hot, warm, and natural.

• Press the temperature button to cycle through the

expected temperatures of 22°C, 24°C, 26°C, and

28°C.

• After the expected temperature is set, the heater

will automatically enter the constant temperature

mode. Other modes do not support the settings of

the expected temperature.

Enabling/Disabling the Wi-Fi

• To enable or disable Wi-Fi, press and hold the

scheduled on/off button and the oscillation

button simultaneously for seven seconds.

Resetting the Wi-Fi

• Press and hold the scheduled on/off button

and the temperature button simultaneously

for seven seconds. When the heater enters the

network configuration mode, the Wi-Fi is reset

successfully.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi Smart Tower Heater Lite in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xiaomi Smart Tower Heater Lite Manual

Product: