801227
9
Zoom out
Zoom in
Previous page
1/453
Next page
08
Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with other smart
home devices.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the app
is installed already. Or search for "Mi Home/Xiaomi
Home" in the app store to download and install it.
Open the Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow
the instructions to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app
displayed on your device should be taken as the default.
Notes:
• The version of the app might have been updated, please follow the instructions based on the
current app version.
If the robot vacuum's QR code cannot be scanned, you can search for its name to add it.
• When connecting the robot vacuum to the Mi Home/Xiaomi Home app using an iOS device,
follow the instructions in the app to connect to the robot vacuum's hotspot
"xiaomi-vacuum-b112_mibtxxxx".
Common Issues Possible Causes and Solutions
Make sure the robot vacuum is within the
Wi-Fi coverage with a strong signal, then
reset the Wi-Fi of the robot vacuum and
reconnect to the network.
The robot vacuum cannot
connect to the
"xiaomi-vacuum-b112_mibtxxxx"
network in the Mi Home/Xiaomi
Home app.
The robot vacuum cannot
connect to Wi-Fi.
Check whether the Wi-Fi password is
correct.
The robot vacuum does not support the
5 GHz network frequency band. Please
use a 2.4 GHz network.
The Wi-Fi signal is weak. Make sure the
robot vacuum is within the Wi-Fi
coverage with a strong signal.
There is something wrong with the Wi-Fi
connection. Reset the Wi-Fi and
download the latest version of the Mi
Home/Xiaomi Home app, then try
reconnecting.
Press and hold the buon for five seconds until you hear a "beep", and then
press and hold the buon for five seconds again until you hear the voice
prompt. The robot vacuum then restarts, and seings like scheduled cleaning
and Wi-Fi are restored to factory default.
Reseing System
While the robot vacuum is turned on, press and hold the buons and for
seven seconds. The Wi-Fi is successfully reset when you hear a voice prompt.
Reseing Wi-Fi
8C8BA4EF
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi Robot Vacuum E10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi Robot Vacuum E10 in the language / languages: All languages as an attachment in your email.

The manual is 11.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info