730146
2
Zoom out
Zoom in
Previous page
1/3
Next page
Switching on the device
Making calls
Call: Press a function key twice to select a contact number.
Press and hold a function button for 3 seconds to start
dialing (with white indicator is ashing).
Accept a call: When receiving a call, press a function
button to accept a call. Press and hold a function button for
3 seconds to reject a call.
Problems in carrying out a call: If there is no signal during
a call, you can hear: «there is no connection to network,
please call later». Please check the device signal and try
again later.
Press and hold a function button.
Charging of the device
Switching on: Open a cover of the device, press and hold a
power button for 3 seconds until white indicator lights.
O: When enabled, open the device, press and hold for 3
seconds a power button or established mobile application,
click o the device.
The solution of problems: if there were any problems with
normal operation of the device, press and hold for 3 seconds
a power button to restart the device.
Power button
Pairing of devices
Start the APP, follow its guidance, scan a QR-Code. After
you hear a sound notication of «request for pairing», press
a function key for a successful pairing.
Successful pairing: sound notication «pairing completed
successfully
Interface error: notication sound «gateway error» and red
indicator lights.
Methods to resolve pairing problems:
1. If you have a poor internet signal, it may be a connection
error. Change your location and try to re-pair.
2. If you can not use QR-code, you can press 16 times on
a function key, then you will receive a six-digit identication
number of the device.
Function Button
Using the device
After a successful pairing, the device determines a current
status by an indicator.
Performing a network connection after pressing a function
button: constant blue indicator.
The lack of connections to server after clicking on a function
button: constant yellow indicator.
After pressing a function button, abcense of SIM card or SIM
card is not registered in network: constant red indicator.
Searching of device location: ashing blue indicator.
Alarm clock: ashing yellow indicator.
Plug a power adapter into slot, then a ashing green
indicator lights up. Charging of the device began. A steady
green light indicates a full charge of the device.
A reminder of low battery: If a device battery level is less
than 15%, red indicator start to ash. Please promptly
recharge the device.
GPS tracking device
Charging slot
Charging cable
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi Mitu GPS tracker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi Mitu GPS tracker in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info