795979
13
Zoom out
Zoom in
Previous page
1/98
Next page
22 23
FAQ
Error Possible Cause Solution
The vacuum cleaner does not work.
It is out of battery or has low battery. Fully charge the vacuum cleaner, then
resume use.
Wait until the vacuum cleaner cools down,
then reactivate it.
Clear any blockages from suction opening
or airway passage.
Empty the dust compartment and clean
the filter.
Clear any blockages from the high torque
brush bar and/or the extension rod.
Clear any blockages in the main suction
opening or the extension rod.
Please contact after-sales service to
arrange maintenance.
Only use the original charger to charge the
vacuum cleaner.
The suction power reduces.
It enters into overheat protection mode
triggered by a blockage.
Its suction opening or airway passage is blocked.
The dust compartment is full and/or the filter
is clogged.
The high torque brush bar and/or the extension
rod are blocked.
The main suction opening or the extension rod is
blocked.
Battery pack is damaged.
The charger is incompatible.
The motor makes a strange noise.
The first indicator is red after
turning on the vacuum cleaner.
The first indicator blinks red when
charging the vacuum cleaner.
Make sure the charger is plugged in
correctly.
The vacuum cleaner can be used normally.
Wait until the battery temperature
normalizes, then resume use.
The charger is not connected to the vacuum
cleaner.
The battery is fully charged and went into sleep
mode.
If the problem still persists after ruling out the above two possibilities, please contact after-
sales service for help.
The battery temperature is too low or too high.
The battery indicator does not
light up while charging.
The battery charges slowly.
Error Description of Battery Status Indicator
The vacuum cleaner will stop working if any error occurs, and the indicator
will blink white. Please refer to the information below for your solution.
Vacuum Cleaner
Status
Indicator
Status Indicator Descritpion Possible
Cause Solution
Battery
Depleted
Roller
BrushStuck
Airway
Blocked
Refer to "Cleaning the High Torque Brush
Bar" in the Care & Maintenance section for
directions on how to remove hair and other
debris caught in the roller brush.
The first indicator blinks white for
5 seconds, then goes off. Recharge soon.
The first and second indicators
blink white for 5 seconds
simultaneously, then go off.
Check if any blockages caught in the dust
compartment, extension rod, and/or high
torque brush bar.
All of the three indicators blink
white for 5 seconds simultaneously,
then go off.
Vacuum cleaner
stops working
suddently.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi Mi Vacuum Cleaner G9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi Mi Vacuum Cleaner G9 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 23.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info