610837
28
Zoom out
Zoom in
Previous page
1/100
Next page
14 Getting Started
Using the Automatic Paper Feeder (APF)
Loading Paper
You can load paper, envelopes, card stocks, labels, or transparencies in the
Automatic Paper Feeder. If there is no paper loaded and you attempt to copy
or print, the error message E01 will appear in the Display. The Automatic
Paper Feeder can hold a maximum of 100 sheets of plain paper, or 10
envelopes or other print media. Depending upon media thickness, maximum
capacity may be reduced.
NOTE: If you experience problems feeding any media in the Automatic Paper
Feeder, place the media into the Manual Paper Feeder one sheet at a time.
1 Pull the Extension Tray on the Automatic Paper Feeder all the way up
until it snaps into place.
2 Prepare the print material for loading. For paper, flex paper back and
forth. For transparencies, fan the stack to prevent feeding failures. Do
not fold or crease the paper. Straighten the edges on a level surface.
NOTE: For transparencies, be sure to use transparency stock approved
for use with inkjet printers. Refer to the packaging for the transparency
stock to determine the print side. Hold the transparencies by the edges
and avoid touching the print side. Be careful not to scratch or leave
fingerprints on the print side.
3 Load the sheets in the Automatic Paper Feeder. It is located behind the
Manual Paper Feeder. Ensure that the right edge of the media is in
contact with the right side of the feeder. Do not exceed the rated
capacity. Do not mix different types of print media. Refer to the following
instructions for loading each type of print material.
n Load paper or transparencies with the print side facing you.
n Load letterhead paper with the design side facing you. The top edge
of the sheet with the logo should enter the printer first.
n Load 3-hole paper with the hole punches on the left side when
printing in landscape orientation or right side (portrait orientation) and
the print side facing you.
Ä
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre XK35c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XK35c in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info