610840
12
Zoom out
Zoom in
Previous page
1/60
Next page
2.4
User Guide
LOADING MEDIA
Gently push the paper release lever back.
The paper will be clamped by the paper
feed roller inside the printer.
If printing onto an envelope:
Ensure that the side to be printed on is
facing upwards (as shown by the imprint
on the paper tray) and the flap on the
reverse side is closed and at the right
when looking from the front of the
printer. Leave a gap of approximately
1/32 in. (1 mm) between the paper guide
and the left edge of the envelope.
Push the paper release lever back. The
paper will be clamped by the paper feed
roller inside the printer.
Do not reuse the misfed paper.
Do not use materials that:
are composed with glues, inks and
adhesive that could discolor, scorch,
or melt when heat is applied
have cellophane windows, peel-off
adhesive strips
are heavily textured, coated or
embossed
are cotton paper composed of more
than 25% of recycled paper.
5
Note: It is recommended that you load
and print one envelope or
transparency at a time.
6
Note: Paper jams (E1) may
occur if:
the paper lever is not used.
the paper tray is overstacked.
the space between the paper guide
and the left edge of the paper is
greater than 1 mm.
the paper guide is pushing the
paper so hard that the paper
buckles.
the paper is not stored properly
and absorbs moisture from the air
(replace the paper).
XE90QRG.BK Page 4 Wednesday, January 5, 2000 9:55 AM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre XE90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XE90 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info