Manual Xerox WorkCentre XE 60 (page 53 of 58) (English)

610832

Zoom out

Zoom in

1/58

5. Place the toner cartridge on the scrap paper prepared in step 2.

The fusing unit beneath the drum cartridge becomes very hot

when the WorkCentre is in use. Be careful not to touch the fusing

unit when removing the drum cartridge.

6. Hold the tabs on the drum cartridge handle

between your thumbs and index fingers,

and gently pull the drum cartridge up and

out in a circular motion to lift it clear of the

WorkCentre.

7. Remove the new drum cartridge from the

plastic bag and set it down on a clean,

uncluttered and level surface.

The new drum cartridge is sealed with a sheet of black protective

paper to shield the drum from light. To prevent damage to the

drum surface, do not remove the protective paper until you have

inserted the cartridge into the WorkCentre.

8. Place the used cartridge into the empty bag, seal the bag.

NOTE: Help the environment by recycling your used drum cartridge. Use

the recycle sticker packed with the drum cartridge for instructions on

returning the used drum cartridge to Xerox.

9. Hold the tabs on the new drum cartridge

handle between your thumbs and index

fingers. Slide the drum cartridge along the

runners into the WorkCentre.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XE 60 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xerox WorkCentre XE 60 Manual

Product: