Manual Xerox WorkCentre XE 60 (page 47 of 58) (English)

610832

Zoom out

Zoom in

1/58

Cleaning the Drum Cartridge

If some of the print is missing, you may need to clean the surface of the

drum. Because the drum surface is very sensitive, you must take extreme

care when cleaning it. Otherwise, it may become damaged and will have a

serious effect on the print quality.

• Replacement of drum cartridges, toner cartridges, and other

supplies are customer maintenance responsibilities and are not

covered by this warranty. See the Warranty. Refer to

Consumables.

• Put the drum cartridge down on a clean, uncluttered and level

surface. The drum can easily become damaged if it is not handled

with care.

• Do not let the drum surface come into contact with fingerprints,

water, alcohol or other solvents that will damage the drum surface.

• Do not touch the drum surface with the edges of the rolled-up

paper.

Follow the procedure below to clean the drum surface.

1. Unplug the power cord.

2. Remove the toner cartridge. (Refer to Replacing the Toner Cartridge).

3. Remove the drum cartridge. (Refer to Replacing the Drum Cartridge).

4. Take a sheet of clean paper and roll it into a tube.

Roll it tightly so that the diameters of the holes at

each end are less than the thickness of your little

finger.

5. Holding the drum cartridge as shown, gently rub the

surface of the drum with the rolled-up paper to

remove any particles of toner caking on the drum

into a wastebasket or onto a prepared surface.

6. Replace the drum cartridge. (Refer to Replacing the

Drum Cartridge).

7. Replace the toner cartridge. (Refer to Replacing the

Toner Cartridge).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XE 60 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xerox WorkCentre XE 60 Manual

Product: