610832
38
Zoom out
Zoom in
Previous page
1/58
Next page
29
Printer Driver Software Installation (XE80, XE82)
The printer driver software is the program which runs the printer. It converts
the data in the file you want to print into information that the printer can
understand. It also controls communication between the printer and
computer as the data is printed.
You will need the following PC hardware and software in order to use the
printer driver:
WorkCentre XE Series
Computer type IBM PC/AT or Compatible Computer
Operating system Windows 3.1x, Windows 95, Windows 98,
Windows NT 4.0
CPU 486DX 66 MHz or better
RAM 8 MB or more
IEEE-1284 parallel
cable
To ensure reliability use the IEEE-1284
compliant parallel cable that is supplied with
the machine. Only cables labeled “IEEE-1284”
can be used with your WorkCentre.
If your PC does not have a CD-ROM Drive:
If you have access to a computer with a CD-ROM drive and a floppy disk
drive, the WorkCentre XE CD-ROM has a program to create a set of
installation diskettes.
NOTE: Refer to Creating WorkCentre XE Floppy Disk Installation
Diskettes section in this User Guide for instructions on making your own
floppy diskettes.
There are two other options available to you. Refer to the order sheet that is
packaged with the WorkCentre XE. This sheet explains how you can:
download the necessary software from the WEB site at:
http://www.teamxrx.com
order floppy diskettes from Xerox.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre XE 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XE 60 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info