610849
43
Zoom out
Zoom in
Previous page
1/63
Next page
35
Single Pass Feeder Misfeed/Automatic
Document Feeder
When a misfeed occurs in the feeder, the red SPF/ADF misfeed indicator
flashes on the Copier Diagram, and an A1 or A2 status code will flash in
the display window. The status code indicates the number of originals that
must be returned to the feeder after clearing the misfeed.
A1 status code- refeed the last original.
A2 status code- refeed the last 2 originals.
This code will disappear when copying is resumed or the clear key is
pressed.
Details for clearing the three types of feeder misfeeds are given below.
Input Misfeed
1. Open the feeding roller cover and pull
the original gently to the left and out of
the document feeder tray.
2. Close the feeding roller cover.
3. Open and close the document cover to
clear the misfeed indicator.
4. Press Start to continue copying.
Exit Misfeed
1. Open the document cover and turn the
roller knob to remove the misfed
original from the exit area.
If paper cannot be easily removed, skip
to the Roller Misfeed.
2. Close the document cover.
3. Press Start to continue copying.
Roller Misfeed
1. Open the document cover and turn the
roller knob to remove the misfed
original from the document feeder tray
or the exit area. If the original is difficult
to remove, gently remove it from under
the feeding roller.
2. Close the document cover.
3. Press Start to continue copying.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre XD 155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XD 155 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info