610849
19
Zoom out
Zoom in
Previous page
1/63
Next page
11
Control Panel
7. Variable Percentage: Press the down key to decrease the
percentage. Press the up key to increase the percentage. Any
percentage from 50% to 200% may be selected.
8. %: Press this key to display the reduction/enlargement percentage
selected.
9. Display Window: Copy quantity, reduction/enlargement settings, and
status codes appear in this area.
10. Quantity Keys: Select up to 100 copies. Press the 1 key to increase
the quantity by one. Press the 10 key to increase the quantity by 10.
To display the number of copies requested during the copy run press
the 10 key.
Press the Clear key to clear the selected quantity.
11. WorkCentre Diagram: Helps you locate areas that require your
attention. The indicators will flash in the area requiring attention. For
additional information refer to the Problem Solving section.
12. Paper Supply Selection (XD104/ 105f/ 120f/ 130df/ 155df only):
Press to change the selected paper supply. The selected paper supply
location will be indicated by a green light on the WorkCentre diagram.
13. SPF/ADF Misfeed Indicator: This indicator will light when a misfeed
occurs in the SPF or the ADF.
14. On-line/Off-line Key: Press this button to alternate between On-line
and Off-line status. When the light is lit, the printer is On-line.
15. Ready Indicator: When the light is ON (not flashing), the WorkCentre
is ready to make copies. When the light is flashing after the Start key
is pressed, the WorkCentre is warming up and the copy cycle will begin
automatically.
16. Start: Press this key to begin copying.
The display will change to 1 and increases by 1 as each copy is
made.
17. Clear/Stop: Press this key to stop the WorkCentre while making
copies or to clear copy quantity. If the key is pressed twice quickly, all
programming will be cleared.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre XD 155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre XD 155 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info