Installation and Setup
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide
36
4. Click Default Browser in the Printer Browser window.
5. Select your printer from the list, then click Add.
Note: If your printer was not detected by the network, check to make sure that the printer is on and
the Ethernet cable is connected properly.
If you want to connect by specifying the printer’s IP address:
1. Open System Preferences from the Applications folder.
2. Open Print & Fax and select the Printing tab.
3. Click the plus button under the list of detected printers.
4. Click IP Printer in the Printer Browser window.
5. Select IPP, Line Printer Daemon – LPD, or HP Jet Direct – Socket from the Protocol list.
6. Type the printer’s IP address in the Address field.
7. Type a Name for the printer.
8. Type a location for the printer.
9. Select Xerox from the Print Using drop-down list.
10. Select your printer model from the list.
11. Click Add.
Adding the Printer for OS X Version 10.5
1. Open the Applications folder, then double-click System Preferences.
2. Click Print & Fax.
3. Click the plus button under the list of installed printers.
4. Type the IP address or host name of the printer you want to add.
5. Type a Queue name for your printer or leave it blank to use the default queue.
6. Select your printer from the list, then click Add.
Note: If your printer was not detected by the network, check to make sure that the printer is on,
and the Ethernet cable is connected properly.
If you want to connect by specifying the printer’s IP address:
1. From the Applications folder on the dock, click the System Preferences icon.
2. Click Print & Fax.
3. Click the plus button under the list of installed printers.
4. Click IP Printer.
5. Select IPP, Line Printer Daemon – LPD, or HP Jet Direct – Socket from the Protocol list.
6. Type the printer’s IP address in the Address field.
7. Type a name for the printer.
8. Type a location for the printer.
9. Select a driver to use from the Print Using drop-down list.
10. Select your printer model from the list.
11. Click Add.
