610851
54
Zoom out
Zoom in
Previous page
1/266
Next page
Printing
WorkCentre 7425/7428/7435
User Guide
54
2. Load envelopes in the bypass tray with the flap side up. The flaps should always be closed and on
the leading (right) edge.
3. Center the stack, then slide the guides until they are just touching the edges of the stack.
4. Select Change Settings on the touch screen, then choose the envelope size on the printer’s touch
screen, touch Save, then touch Confirm.
5. Set the printer to select the envelope size you loaded automatically, or manually specify the bypass
tray using the touch screen.
Configuring the Envelope Tray
The optional envelope tray provides higher volume envelope capacity. The envelope tray replaces Tray
1 in the printer, and must be configured before use.
To configure the envelope tray for use:
1. Remove Tray 1 from the printer.
2. Insert the envelope tray in the Tray 1 position in the printer.
3. On the printer’s front panel, press Log in/Out.
4. Using the keyboard on the printer’s touch screen, enter admin, touch Next, enter 1111, then
touch ENTER.
5. Press Machine Status.
6. Touch the Tools tab, then touch System Settings.
7. Touch Common Service Settings.
8. Under Features, scroll down to Other Settings, then touch Tray 1 Configuration.
9. Touch Change Settings, then touch Couple as Envelope Feeder.
10. Touch Save, then touch Close.
11. Under Features, touch Paper Tray Settings, then touch Paper Tray Attributes, then touch Tray 1.
12. Touch Change Settings, then touch the checkbox for Envelope Feeder, then touch
Change Settings.
13. Ensure that Paper Type is set to Envelope.
14. Under Paper Size, touch the desired envelope size.
15. Touch Save, then touch Confirm, then touch Close, then touch Close again.
16. The envelope tray is now ready for use.
wc74xx
-
208
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 7428 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 7428 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 7428

Xerox WorkCentre 7428 User Manual - German - 274 pages

Xerox WorkCentre 7428 User Manual - Dutch - 270 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info