484165
194
Zoom out
Zoom in
Previous page
1/232
Next page
Troubleshooting
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
194
Partial blanks, creased paper, or
blotted printing.
The paper is damp. Replace the paper.
The paper is outside the
recommended specification
range.
Replace the paper with a recommended
size and type. For details, see Supported
Paper on page 58.
The transfer belt unit or the
fuser is not installed correctly.
Reinstall the transfer belt unit or the
fuser. For details, see the instruction
sheets in the documentation packet
that came with your printer.
The toner cartridges are not
Xerox
®
toner cartridges.
Verify that the toner cartridges meet
specifications and replace if necessary.
For details, see Consumables on
page 169.
Condensation inside the printer
causes partial blanks or creased
paper.
Turn on the printer and leave it on for at
least one hour to get rid of the
condensation. If the problems still occur,
for assistance see the Xerox
®
Support
website:
www.xerox.com/office/WC6505support
Vertical blanks. The laser is being blocked. Remove the imaging unit and clean all
debris from the laser lens with a lint-free
cloth. For details, see Cleaning the
Imaging Unit and Laser Lens on
page 196.
The transfer belt unit or fuser is
old or damaged.
Check the condition of the transfer belt
unit and fuser, and replace if necessary.
The toner cartridges are not
Xerox
®
toner cartridges.
Verify that the toner cartridges meet
specifications and replace if necessary.
Slanted printing. The paper guides in the trays
are not set correctly.
Reset the paper tray guides. For details,
see Loading Paper on page 61.
Horizontal bands,
approximately 22 mm wide,
appear vertically every 73 mm.
The imaging unit has been
exposed to too much light;
possibly from leaving the front
door open too long.
Replace the imaging unit.
Symptom Cause Solution
194


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 6505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 6505 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 6505

Xerox WorkCentre 6505 User Manual - German - 250 pages

Xerox WorkCentre 6505 User Manual - Dutch - 244 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info