484165
189
Zoom out
Zoom in
Previous page
1/232
Next page
Troubleshooting
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
189
Print job sent but the light of
the Ready indicator is not
blinking or on.
Is the Ethernet or USB interface cable disconnected?
Turn off the power and check the connection of the interface cable.
Is the protocol configured?
Check the port status of the interface. Make sure that the protocol settings
are correctly configured in CentreWare
Internet Services. For details, access
Help in CentreWare
Internet Services.
Is the computer environment set up correctly?
Check the computer environment, such as the print driver. For details, see
Installation and Setup on page 27.
Error indicator is on. Is there an error message displayed on the control panel?
Check the displayed message and correct the error. For details, see Control
Panel Messages on page 184.
Error indicator is blinking. An error has occurred that you cannot correct by yourself.
Record the displayed error message or error code, turn off the power, and
disconnect the power plug from the outlet. Refer to the Xerox
®
Support
website at www.xerox.com/office/WC6505support.
Light of the Ready indicator is
on and blinking but there is no
print output.
There are jobs remaining in the printer.
Cancel printing or force the remaining data to be printed.
To force the print job, press the OK button. To cancel the job, press the
Cancel button.
Top section of printed
document is missing. The top
and side margins are incorrect.
Are the paper tray guides in the correct positions?
Set the length guide and the width guides to the correct positions. For
details, see Loading Paper on page 61.
Check that the paper size on the print driver or the control panel is correctly
set. For details, see Setting Paper Types and Sizes on page 68.
For details, see the online help for the print driver.
Check that the margin setting is correct on the print driver. (PCL only).
For details, see the online help for the print driver.
Condensation has occurred
inside the printer.
Turn on the printer and leave it on for at least one hour to get rid of the
condensation. If the problem continues, refer to the Xerox
®
Support
website at www.xerox.com/office/WC6505support.
Symptom Reason/Solution
189


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 6505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 6505 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 6505

Xerox WorkCentre 6505 User Manual - German - 250 pages

Xerox WorkCentre 6505 User Manual - Dutch - 244 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info