Manual Xerox WorkCentre 5955 (page 21 of 764) (German)

610821

Zoom out

Zoom in

1/764

Sicherheit und gesetzliche Bestimmungen WorkCentre

5945/5955

Bedienungshandbuch 19

Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular

plug is provided with this product. It is designed to be connected to a compatible modular jack that

is also compliant. See installation instructions for details.

You may safely connect the device to the following standard modular jack: USOC RJ-11C using the

compliant telephone line cord (with modular plugs) provided with the installation kit. See installa-

tion instructions for details.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be con-

nected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing

in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five

(5.0). To be certain of the number of devices that may be connected to a line, as determined by the

total RENs, contact the local Telephone Company. For products approved after July 23, 2001, the

REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The

digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier

products, the REN is separately shown on the label.

To order the correct service from the local telephone company, you may also have to quote the

codes listed below:

• Facility Interface Code (FIC) = 02LS2

• Service Order Code (SOC) = 9.0Y

ACHTUNG

Ask your local telephone company for the modular jack type installed on your line. Connecting this

machine to an unauthorized jack can damage telephone company equipment. You, not Xerox, as-

sume all responsibility and/or liability for any damage caused by the connection of this machine to

an unauthorized jack.

If this Xerox equipment causes harm to the telephone network, the Telephone Company will notify

you in advance that temporary discontinuance of service may be required. But if advance notice is

not practical, the Telephone Company will notify the customer as soon as possible. Also, you will be

advised of your right to file a complaint with the FCC if you believe it is necessary.

The Telephone Company may make changes in its facilities, equipment, operations or procedures

that could affect the operation of the equipment. If this happens, the Telephone Company will pro-

vide advance notice in order for you to make necessary modifications to maintain uninterrupted

service.

If trouble is experienced with this Xerox equipment, for repair or warranty information, please con-

tact the appropriate service center; details of which are displayed either on the machine or contai-

ned within the User Guide. If the equipment is causing harm to the telephone network, the

Telephone Company may request that you disconnect the equipment until the problem is resolved.

Repairs to the machine should be made only by a Xerox Service Representative or an authorized Xe-

rox Service provider. This applies at any time during or after the service warranty period. If unau-

thorized repair is performed, the remainder of the warranty period is null and void.

This equipment must not be used on party lines. Connection to party line service is subject to state

tariffs. Contact the state public utility commission, public service commission or corporation com-

mission for information.

If your office has specially wired alarm equipment connected to the telephone line, make sure that

the installation of this Xerox equipment does not disable your alarm equipment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5955 in the language / languages: German as an attachment in your email.

The manual is 9,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5955

Xerox WorkCentre 5955 User Manual - English - 720 pages

Xerox WorkCentre 5955 User Manual - Dutch - 774 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xerox WorkCentre 5955 Manual

Product: