Copy WorkCentre
®
5845/5855/5865/5875/5890
90 User Guide
7. Select the Image Shift option required.
• Off removes any previous Image Shift settings. This option is useful if you are
programming a complex job and want to cancel any image shift settings without
cancelling other settings you have made.
• Margin Shift moves the image up / down or left / right on the page to give larger or smaller
margins. Use the arrow buttons to enter the shift required. The amount of shift is in 1mm
(0.1”) increments up to 50mm (2.0”). When copying 2-sided there are two options.
• Adjust the margin of side two independently of side one.
•Check the Mirror Side 1 checkbox if you want the side 2 shift to mirror the shift set for side
1.
• Auto Center automatically centers the scanned image on the output paper. To work
effectively, the original should be smaller than the selected output media or alternatively,
the image should be reduced.
• Use the Presets menu to select a commonly used Image Shift. Your System Administrator
can alter the preset options. Once you have selected a preset option has been selected you
can edit it using the arrow buttons. The amount of shift is in 1mm (0.1”) increments up to
50mm (2.0”). When copying 2-sided there are two options.
• Adjust the margin of side two independently of side one.
•Check the Mirror Side 1 checkbox if you want the side 2 shift to mirror the shift set for side
1.
8. Select the OK button.
9. Enter the number of prints required using the numeric keypad on the control panel.
10. Press the Start button on the control panel to scan the original.
11. Remove the original from the document feeder or document glass when scanning has
completed. The job enters the job list ready for processing.
12. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
13. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Using a User ID to Log In at the Device
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Erasing Edges from Copies
When you press the Start button to make a copy, the device scans your originals and temporarily
stores the images. It then prints the images based on the selections made.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Copy features.
