610815
636
Zoom out
Zoom in
Previous page
1/702
Next page
Paper and Media WorkCentre
®
5845/5855/5865/5875/5890
634 User Guide
It is important to select the correct Type for the media loaded in the tray. The device can detect
different types of media as each page travels through the paper path and will halt a job if a
mismatch occurs.
Only use the types of media specified for use in the tray.
•Plain
•Bond
•Recycled
•Punched
Letterhead and Pre-printed
•Pre-cut tabs
•Rough Surface
•Glossy
•Cardstock
Lightweight Cardstock
This tray must not be used to feed labels, transparencies or envelopes. The Bypass Tray can be used
for these media types. The optional Envelope Tray can be used in place of Tray 2 for envelopes.
CAUTION: A problem will occur if a tray is opened while it is being used to feed media.
CAUTION: Do not open Tray 1 if Tray 2 is open.
1. Open the tray.
2. Place the media in the tray. Media must be positioned against the left side of the tray.
Paper must not be loaded above the maximum fill line.
Load pre-printed paper face-down and with the top towards the front of the device.
Load hole punched paper with the holes on the left edge.
3. Make sure that the guides just touch the paper.
To position the right side guide, squeeze the clamp mechanism and slide the guide to
touch the right edge of the media.
To position the rear guide, squeeze the clamp mechanism and slide the guide to touch the
rear edge of the media.
4. Close the paper tray.
5. If the tray is set to Dedicated this is the end of the loading process.
If the tray is set to Fully Adjustable the paper tray settings will be displayed on the screen. If the
settings are correct select the Confirm button. If the settings are not correct change the
settings as required.
636


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5845 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5845 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5845

Xerox WorkCentre 5845 User Manual - German - 754 pages

Xerox WorkCentre 5845 User Manual - Dutch - 760 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info