610812
298
Zoom out
Zoom in
Previous page
1/328
Next page
Troubleshooting
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
General Care and Troubleshooting
298
Streaks, lines, spots, solid lines
or dotted lines on the prints
•Clean the document glass and, if using the document feeder, also clean
the Constant Velocity Transport glass (the thin strip of glass to the left
of the document glass), especially near the plastic ramp on the glass.
Clean the white underside of the document feeder/document cover.
•Clean the document feeder roller.
Clean the halo guide.
Clean the Charge Scorotron and Transfer Corotron, if available on your
device.
Check the paper tray guides are against the paper stack.
Run the job from the document glass.
Check the quality of the original. Use Edge Erase to remove lines from
the edges of the document, refer to Edge Erase on page 54 of Copy.
Use the Background Suppression feature, refer to Background
Suppression on page 51 of Copy.
Load fresh paper.
Do not use heavily embossed paper.
Image Loss When copying a document from a larger paper size to a smaller size, use
Auto% to reduce the image onto the smaller size, refer to
Reduce/Enlarge on page 44 of Copy.
Use reduction i.e. copy at 90% instead of 100%.
•Use the Auto Center feature and run the job again. Refer to Image Shift
on page 53 of Copy.
If scanning from the document glass use Original Size to define the
document size, refer to Original Size on page 52 of Copy. Register the
document in the right rear corner and copy with the cover down.
Do not use heavily embossed paper.
Blurred images on output Load fresh paper.
•If copying from the document glass, check the quality of the originals,
close the cover and try again. Ensure that the original is entirely flat
against the document glass.
•Use Original Size to specify the size of the original, refer to Original Size
on page 52 of Copy.
•Clean the Charge Scorotron and Transfer Corotron, if available on your
device. Refer to Xerographic Module Maintenance on page 291.
•Clean the document glass and if using the document feeder also clean
the Constant Velocity Transport Glass (the thin strip of glass to the left
of the document glass), especially near the plastic ramp on the glass.
Refer to Document Glass and Constant Velocity Transport Glass on
page 290.
Missing characters on output Load fresh paper.
Try using a smoother paper.
Select darken if the original is light or the font is colored.
Gloss variations (coining) Check the quality of the original.
If the original has large areas of solid density, adjust the contrast.
Problem Potential Solution
298


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5765 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5765 in the language / languages: English as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5765

Xerox WorkCentre 5765 User Manual - German - 326 pages

Xerox WorkCentre 5765 User Manual - Dutch - 338 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info