610759
32
Zoom out
Zoom in
Previous page
1/133
Next page
Switching On / Off
Xerox WorkCentre 5016/5020 User Guide 32
Power Saver
The machine has a power-efficient feature called Power Saver to minimize power
consumption during inactivity. When the machine is inactive for a specified period of
time, it activates the Power Saver feature.
The Power Saver feature has two stages: Low Power Mode and Sleep Mode.
The machine enters the Low Power Mode first if it remains inactive for a preset period
of time. Then it enters the Sleep Mode to further reduce power consumption.
Low Power Mode
When the machine enters the Low Power Mode, the machine reduces the power to the
Fuser Unit.
It may not be noticeable that the machine switches to the Low Power Mode, because
no change is visible on the surface. When the machine is in the Low Power Mode, no
particular action is required in order to use the machine. The machine simply exits this
mode when you press any buttons on the Control Panel or when you send a print job
or a scan job.
You can specify how long it takes to enable the Power Saver feature when the machine is in the System Setting
Mode (menu number: 11). For more information, refer to "System Settings" (P.123).
Sleep Mode
When the machine enters the Sleep Mode, the machine further reduces its power
consumption.
While the machine is in this mode, the Display goes out, and the <Power Saver> button
is lit. To exit the Sleep Mode to use the machine, press the <Power Saver> button.
You can specify how long it takes to enable the Power Saver feature when the machine is in the System Setting
Mode (menu number: 12). For more information, refer to "System Settings" (P.123).
Exiting the Sleep Mode
The machine exits the Sleep Mode in the following two instances:
When pressing the <Power Saver> button
When the machine receives a print job or a scan job
The following procedure describes how to exit the Sleep Mode manually.
1.
Press the <Power Saver> button.
<Power Saver>
button
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5020-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5020-B in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5020-B

Xerox WorkCentre 5020-B User Manual - German - 96 pages

Xerox WorkCentre 5020-B User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info