610758
98
Zoom out
Zoom in
Previous page
1/133
Next page
Fault Clearance Procedure
Xerox WorkCentre 5016/5020 User Guide 98
Troubleshooting Table
If you are experiencing any difficulties using the machine, check the table below for the
recommended solutions.
Symptom Recommendation
The machine will not switch on.
z
Check the power cord.
z
Check that the Power Switch is pressed on
to the [ ] position.
z
Check that the AC outlet is supplying
voltage. Connect another appliance to the
outlet to verify the voltage supply.
An error is indicated on the Machine Diagram
(mimic).
z
If any indicators on the Machine Diagram
(mimic) are lit or flashing, apply the
appropriate solutions.
z
If an error code appears in the Display,
refer to the Error Code Label, and apply the
suggested solutions.
The document will not feed through the
Document Feeder.
z
Check that the Document Feeder is not
overloaded. The Document Feeder can
hold up to 50 sheets.
z
Check that the document is fully inserted
into the Document Feeder.
z
Using a lint-free cloth, lightly wipe the
underside of the Document Cover.
z
Load the documents, and then check that
the side guides are not too tight.
z
If the document is curled, make sure to
straighten it before loading it again in the
Document Feeder.
The machine does not accept documents into
memory.
z
If memory is at its maximum capacity, print
and delete unnecessary files.
All the indicators on the Control Panel are off.
(The <Power Saver> button is lit.)
z
Touch the <Power Saver> button on the
Control Panel to disable the Sleep Mode.
For information on the Sleep Mode, refer to
"Sleep Mode" (P.32) under "Power Saver".
For information on how to change the Sleep Mode
setting, refer to "System Settings" (P.123).
Failed to run a print job.
z
Delete the print job, and run the print job
again.
z
Switch off the machine. Wait for five
seconds, then switch on the machine.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5016 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5016

Xerox WorkCentre 5016 User Manual - German - 96 pages

Xerox WorkCentre 5016 User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info