610758
93
Zoom out
Zoom in
Previous page
1/133
Next page
Fault Clearance Procedure
Xerox WorkCentre 5016/5020 User Guide 93
C Codes
Error Code Description Remedy
C0 When using the Document Feeder to
scan a document, the scanned
image that is enlarged or reduced by
the specified zoom ratio does not fit
entirely on the paper that is loaded in
the tray that you specified.
Stop the job. Specify the smaller zoom
ratio, or load the bigger sized paper in
the tray before running the job again.
For information on how to specify the
zoom ratio, refer to "<Variable Ratio>
button" (P.24) or "<Reduce/Enlarge>
button" (P.24).
For information on how to change the size
of paper in the tray, refer to "Changing the
Size and Orientation of Paper in Tray 1"
(P.46) and "Changing the Size and
Orientation of Paper in Tray 2" (P.48).
When Automatic Paper Selection
(menu number: 7) is enabled, the
machine is unable to select a tray,
because none of the trays are
loaded with the appropriate size of
paper.
Press the <Stop> button to cancel the
job. Load a tray with the desired size
of paper.
For information on how to load paper in
the trays, refer to "Loading Paper in the
Trays" (P.42).
C1 Paper jammed in Tray 1. Remove the jammed paper. Check
that the paper guides are adjusted
correctly.
For information on how to clear paper
jams in Tray 1, refer to "C1: Paper Jam in
Tray 1" (P.106).
For information on how to correctly adjust
the paper guides, refer to Step 4 of the
procedure "Loading Paper in Tray 1"
(P.42).
C2 Paper jammed in Tray 2. Remove the jammed paper. Check
that the paper guides are adjusted
correctly.
For information on how to clear paper
jams in Tray 2, refer to "C2: Paper Jam in
Tray 2" (P.107).
For information on how to correctly adjust
the paper guides, refer to Step 3 of the
procedure "Loading Paper in Tray 2"
(P.43).
C3 Paper jammed in the Bypass Tray. Remove the jammed paper. Check
that the paper guides are adjusted
correctly.
For information on how to clear paper
jams in the Bypass Tray, refer to "C3:
Paper Jam in the Bypass Tray" (P.108).
The Bypass Tray is out of paper. Open and close the Left Side Cover
once, and load paper in the Bypass
Tray.
For information on how to load paper in
the Bypass Tray, refer to "Loading Paper
in the Bypass Tray" (P.44).
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 5016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 5016 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 5016

Xerox WorkCentre 5016 User Manual - German - 96 pages

Xerox WorkCentre 5016 User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info