610756
222
Zoom out
Zoom in
Previous page
1/228
Next page
14 Troubleshooting
216 Xerox WorkCentre 4250/4260 User Guide
Error and Fault Codes
If an abnormal condition arises in the machine or an incorrect operation is
performed, a message indicating the nature of the error is displayed on the User
Interface screen.
Follow the on-screen prompts to correct the error.
If the fault persists, Power Off / Power On.
If the problem persists, call for service.
Errors & Faults Description Solution
Paper
Feeder
Door Open The back cover or front covers
are not securely latched.
Close the covers until they lock into
place. If fault persists, call service.
Tray Paper Low Paper supply in tray has run low
(fewer than 50 sheets).
Load paper in the tray indicated by
the warning message.
Paper Empty at Tray The copy paper in the paper
tray has run out.
Load paper in the tray indicated by
the warning message.
Paper Empty at Bypass
Tray
The copy paper in the bypass
tray has run out.
Load paper in the bypass tray.
Tray Cassette Out Paper tray is not securely
closed.
Close the paper tray until it locks into
place.
Jam from Tray Copy paper has jammed in the
paper tray.
Open the indicated tray and remove
the jammed paper.
Open back and front covers and
remove jam.
Duplex Jam Copy paper has jammed in the
side cover.
Open the back covers and remove
the jammed paper.
Out Bin Full Output tray is more than 90%
full.
Remove printed material from page
output area.
CRU
Toner Low Toner Cartridge is almost
empty.
Open front cover. Remove Toner
Cartridge and gently shake it. By
doing this, printing operations can be
temporarily resumed.
Reinstall Toner Cartridge. Close front
cover. Reorder Toner Cartridge.
Toner Empty Toner Cartridge is empty. Open front cover.
Replace with new Toner Cartridge.
Toner Cartridge Not
Installed
The Toner Cartridge is not
installed, or is not installed
correctly.
Install the Toner Cartridge.
If already installed, check it has been
installed correctly.
If problem persists, call for service.
222


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 4260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 4260 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 4260

Xerox WorkCentre 4260 User Manual - German - 230 pages

Xerox WorkCentre 4260 User Manual - Dutch - 238 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info