610749
210
Zoom out
Zoom in
Previous page
1/262
Next page
Troubleshooting
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
210
Common Linux Problems
Condition Suggested Solutions
The machine does not print. Check if the printer driver is installed on your system. Open the Unified
Driver Configurator and switch to the Printers tab in the Printers
configuration window to look at the list of available machines. Make
sure that your machine is displayed on the list. If not, open the Add new
printer wizard to set up your machine.
Check if the machine is started. Open the Printers configuration
window and select your machine from the printer list. Look at the
description in the Selected printer pane. If its status contains Stopped,
press the Start button. Normal operation of the machine should be
restored. The “stopped” status might be activated if problems in
printing occurred. For instance, this could be an attempt to print a
document when the port is being used by a scanning application.
Ensure the port is not busy. Since functional components of the
machine (printer and scanner) share the same I/O interface (port),
simultaneous access of different “consumer” applications to the same
port is possible. To avoid possible conflicts, only one of them at a time is
allowed to gain control over the machine. The other “consumer” will
encounter a “device busy” response. You should open the Ports
Configuration window and select the port assigned to your machine. In
the Selected port pane you can see if the port is occupied by some
other application. If this is the case, you should either wait for
completion of the current job or press the Release port button.
Check if your application has a special print option such as “-oraw”. If
“-oraw” is specified in the command line parameter, then remove it to
print properly. For Gimp front-end, select the “print” -> “Setup printer”
and edit command line parameters in the command item.
The CUPS (Common Unix Printing System) version distributed with SuSE
Linux 9.2 (cups-1.1.21) has a problem with ipp (Internet Printing
Protocol). Use the socket printing instead of ipp or install a later version
of CUPS (cups-1.1.22 or higher).
The machine does not print
whole pages, and output is
printed on half the page.
It is a known problem that occurs on version 8.51 or earlier of
Ghostscript, 64-bit Linux OS.The problem is solved in AFPL Ghostscript v.
8.52 or above. Download the latest version of AFPL Ghostscript from
http://sourceforge.net/projects/ghostscript/ and install it to solve this
problem.
Cannot scan via Gimp
Front-end.
Check if the Gimp Front-end has Xsane: Device dialog. on the Acquire
menu. If not, you should install the Xsane plug-in for Gimp on the your
computer. You can find the Xsane plug-in package for Gimp on the Linux
distribution CD or the Gimp home page. For detailed information, refer
to the ‘Help for Linux’ distribution CD or the Gimp Front-end application.
If you wish to use another kind of scan application, refer to the
application’s Help files.
210


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 3325DNI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 3325DNI in the language / languages: English as an attachment in your email.

The manual is 10,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 3325DNI

Xerox WorkCentre 3325DNI User Manual - German - 264 pages

Xerox WorkCentre 3325DNI User Manual - Dutch - 270 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info