Scan Procedure
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
49
Scan to Network PC from Control Panel
Make sure that your machine is connected to a network. Make sure the machine has been configured
using the Xerox Scan Assistant utility and the scan driver has been installed. For instructions, refer to
the System Administrator guide.
1. Press Scan on the control panel.
2. Press the up/down arrows to highlight Network PC.
3. Press OK. If you see the Not Available message, check the connection and/or setup.
4. Press the up/down arrows to highlight the Login ID you want and press OK.
5. If necessary, enter the password using the keypad and press OK.
6. Press the up/down arrows to highlight the Scan Destination you want and press OK.
7. Press the up/down arrows to highlight the Resolution you want and press OK.
8. Press the up/down arrows to highlight the Color option you want and press OK.
9. Press the up/down arrows to highlight the File Format you want and press OK.
Note: You can also use the Xerox Scan Assistant to scan documents directly from your PC. Refer to
Scan Assistant on page 55.
Scan to SMB
Make sure that your machine is connected to a network. Make sure the machine has been configured
using CentreWare Internet Services. Refer to the System Administrator guide for instructions.
1. Press Scan on the control panel.
2. Press the up/down arrows to highlight SMB and press OK.
3. If required, press the 2 Sided button and Menu button to select the Scan settings. Refer to Select
the Features on page 50.
4. Press OK.
5. If Authentication is enabled, enter your Login ID and, if required, your password.
6. Press the up/down arrows until the server you want highlights and press OK.
7. Press the up/down arrows to highlight the File Format you want and press OK.
Scan to FTP
Make sure that your machine is connected to a network. Make sure the machine has been configured
using CentreWare Internet Services. Refer to the System Administrator guide for instructions.
1. Press Scan on the control panel.
2. Press the up/down arrows to highlight FTP and press OK.
3. If required press the 2 Sided button and Menu button to select the Scan settings. Refer to Select
the Features on page 50.
4. Press OK.
5. If Authentication is enabled, enter your Login ID and, if required, your password.
6. Press the up/down arrows until the server you want highlights and press OK.
7. Press the up/down arrows to highlight the File Format you want and press OK.