610748
211
Zoom out
Zoom in
Previous page
1/262
Next page
Troubleshooting
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
211
Note: Refer to the Linux User Guide supplied with your computer for further information on Linux
error messages.
Error message “Cannot open
port device file” displays when
printing a document.
Avoid changing print job parameters (via LPR GUI, for example) while a
print job is in progress. Known versions of CUPS server break the print
job whenever print options are changed and then try to restart the job
from the beginning. Since Unified Linux Driver locks the port while
printing, the abrupt termination of the driver keeps the port locked and
unavailable for subsequent Print jobs. If this situation occurs, try to
release the port by selecting Release port in Port configuration
window.
The machine does not appear
on the scanners list.
Ensure your machine is attached to your computer, connected properly
via the USB port, and is turned on.
Ensure the scanner driver for your machine is installed on your system.
Open Unified Linux Driver configurator, switch to Scanners
configuration, then press Drivers. Make sure that a driver with a name
corresponding to your machine's name is listed in the window.
Ensure the port is not busy. Since functional components of the
machine (printer and scanner) share the same I/O interface (port),
simultaneous access of different “consumer” applications to the same
port is possible. To avoid possible conflicts, only one of them at a time is
allowed to gain control over the machine. The other “consumer” will
encounter “device busy” response. This usually happens when starting a
scan procedure. An appropriate message box appears.
To identify the source of the problem, open the Ports configuration and
select the port assigned to your scanner, port's symbol /dev/mfp0
corresponds to LP:0 designation displayed in the scanners’ options,
/dev/mfp1 relates to LP:1, and so on. USB ports start at /dev/mfp4, so
scanner on USB:0 relates to /dev/mfp4 respectively and so forth
sequentially. In the Selected port pane, you can see if the port is
occupied by another application. If this is the case, you should either
wait for completion of the current job or press the Release port button.
The machine does not scan. Ensure a document is loaded into the machine, ensure your machine is
connected to the computer.
Condition Suggested Solutions
211


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 3325DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 3325DN in the language / languages: English as an attachment in your email.

The manual is 10,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 3325DN

Xerox WorkCentre 3325DN User Manual - German - 264 pages

Xerox WorkCentre 3325DN User Manual - Dutch - 270 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info