610740
237
Zoom out
Zoom in
Previous page
1/294
Next page
Common Problems
Xerox® WorkCentre® 3215/3225
User Guide
225
Common Problems
The following charts list some conditions that may occur and the recommended solutions. Follow the
suggested solutions until the problem is corrected. If the problem persists, call for service.
Paper Feeding Problems
Condition Suggested Solutions
Paper jams during printing. Clear the paper jam. (See Clearing Paper Jams.)
The paper keeps jamming. There is too much paper in the tray. Remove excess paper from the tray.
If you are printing on special materials, use the Manual Feed Slot.
An incorrect type of paper is being used. Use only paper that meets the
specifications required by the machine. (See Media Types.)
There may be debris inside the machine. Clean the inside of the
machine.
(See Cleaning the Machine.)
Paper sticks together. Check the maximum paper capacity of the tray. (See Media
Specifications.)
Make sure that you are using the correct type of paper. (See Media
Types.)
Remove paper from the tray and flex or fan the paper.
Humid conditions may cause some paper to stick together.
Different types of paper may be stacked in the tray. Load paper of only
one type, size, and weight.
Paper does not feed into the
machine.
Remove any obstructions from inside the machine.
Paper has not been loaded correctly. Remove paper from the tray and
reload it correctly.
There is too much paper in the tray. Remove excess paper from the tray.
The paper is too thick. Use only paper that meets the specifications
required by the machine. (See Media Specifications.)
If you are printing on special media, use the Manual Feed Slot.
Transparencies stick together in
the paper exit.
Use only transparencies specifically designed for laser printers. Remove
each transparency as it exits from the machine.
Envelopes skew or fail to feed
correctly.
Ensure that the paper guides are against both sides of the envelopes.
Feed envelopes one at a time through the Manual Feed Slot.
The originals keep jamming in
the automatic document
feeder.
If an original does not feed into the machine, the automatic document
feeder rubber pad may need to be replaced. Contact a service
representative.
237


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 3225DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 3225DN in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 3225DN

Xerox WorkCentre 3225DN User Manual - German - 294 pages

Xerox WorkCentre 3225DN User Manual - Dutch - 298 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info