610743
40
Zoom out
Zoom in
Previous page
1/140
Next page
Copying_39
copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
Selecting the paper tray
Copying
Changing the settings for each copy
Changing the default copy settings
ID card copying
Using special copy features
Printing on both sides of paper
Setting copy timeout
SELECTING THE PAPER TRAY
After loading the print media for copy output, you must select the paper tray
you will use for copy jobs.
1. Press Menu until System Setup appears on the bottom line of the
display and press OK.
2. Press the left/right arrow until Paper Setup appears and press OK.
3. Press the left/right arrow until Paper Source appears and press OK.
4. Press OK when Copy Tray appears.
5. Press the left/right arrow until the paper tray you want appears and
press OK.
6. Press Stop/Clear to return to ready mode.
COPYING
1. Press Copy .
Ready to Copy appears on the top line of the display.
2. Load originals face up into the ADF, or place a single original face down
on the scanner glass.
For details about loading an original, see page 32.
3. Enter the number of copies using the number keypad, if necessary.
4. If you want to customize the copy settings including copy size, darkness,
and original type, by using the control panel buttons. See page 39.
If necessary, you can use special copy features, such as poster copying,
2- or 4-up copying. See page 40.
5. Press Start to begin copying.
CHANGING THE SETTINGS FOR EACH COPY
Your machine provides default settings for copying so that you can quickly
and easily make a copy. However, if you want to change the options for
each copy, use the copy function buttons on the control panel.
1. Press Copy .
2. Press Menu until Copy Feature appears on the bottom line of the
display and press OK.
3. Press the left/right arrow until the setup option you want appears and
press OK.
4. Press the left/right arrow until the setting you want appears and press
OK.
5. Repeat steps 3 through 4, as needed.
6. Press Stop/Clear to return to ready mode.
Darkness
If you have an original containing faint markings or dark images, you can
adjust the brightness to make a copy that is easier to read.
•Light:Works well with dark print.
•Normal:Works well with standard typed or printed originals.
Dark: Works well with light print.
Original Type
The original type setting is used to improve the copy quality by selecting the
document type for the current copy job.
Each time you press the button, the following modes are available:
•Text:Use for originals containing mostly text.
•Text/Photo:Use for originals with mixed text and photographs.
•Photo:Use when the originals are photographs and receipts.
Reduced or enlarged copy
You can reduce or enlarge the size of a copied image from 25% to 400%
when you copy original documents from the scanner glass, or from 25% to
100% from the ADF.
To select from the predefined copy sizes:
The left/right arrow until the size setting you want appears and press
OK.
To scale the copy by directly entering the scale rate:
1. The left/right arrow until Custom appears and press OK.
2. Enter the scale rate and press OK to save the selection.
You can cancel the copy job during an operation. Press Stop/
Clear , and the copying will stop.
If you press Stop/Clear while setting the copy options, all of the
options you have set for the current copy job will be canceled and
returned to their default status. Or, they will automatically return to
their default status after the machine completes the copy in progress.
While you are setting copy options, pressing Stop/Clear cancels
the changed settings and restores the defaults.
When you make a reduced copy, black lines may appear at the
bottom of your copy.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 3220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 3220 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 3220

Xerox WorkCentre 3220 User Manual - German - 153 pages

Xerox WorkCentre 3220 User Manual - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info