Manual Xerox WorkCentre 3210 (page 57 of 140) (English)

610742

Zoom out

Zoom in

1/140

56 _Faxing

Printing sent fax report automatically

You can set the machine to print a report with detailed information about the

previous 50 communication operations, including time and dates.

1. Press Fax .

2. Press Menu until Fax Setup appears on the bottom line of the

display and press OK.

3. Press the left/right arrow until Auto Report appears and press OK.

4. Press the left/right arrow until On appears and press OK.

5. Press Stop/Clear to return to ready mode.

Setting up Address Book

You can set up Address Book with the fax numbers you use most

frequently. Your machine provides you with the following features for setting

up Address Book:

• Speed/Group dial numbers

Speed dial numbers

You can store up to 200 frequently-used fax numbers in speed dial

numbers.

Registering a speed dial number

1. Press Fax .

2. Press Address Book until New & Edit appears on the bottom

line of the display and press OK.

3. Press OK when Speed Dial appears.

4. Enter a speed dial number between 0 and 199 and press OK.

If an entry is already stored in the number you choose, the display

shows the name to allow you to change it. To start over with another

speed dial number, press Back .

5. Enter the name you want and press OK.

For details on how to enter alphanumeric characters, see page 30.

6. Enter the fax number you want and press OK.

7. Press Stop/Clear to return to ready mode.

Editing speed dial numbers

1. Press Address Book until New & Edit appears on the bottom

line of the display and press OK.

2. Press OK when Speed Dial appears.

3. Enter the speed dial number you want to edit and press OK.

4. Change the name and press OK.

5. Change the fax number and press OK.

6. Press Stop/Clear to return to ready mode.

Using speed dial numbers

When you are prompted to enter a destination number while sending a

fax, enter the speed dial number at which you stored the number you

want.

• For a one-digit (0-9) speed dial number, press and hold the

corresponding digit button on the number keypad.

• For a two- or three-digit speed dial number, press the first digit

button(s) and then hold down the last digit button.

You can also search through memory for an entry by pressing Address

Book . See page 57.

Group dial numbers

If you frequently send the same document to several destinations, you

can group these destinations and set them under a group dial number.

You can then use a group dial number to send a document to all of the

destinations within the group. You can set up to 100 group dial numbers

using the destination’s existing speed dial numbers.

Registering a group dial number

1. Press Fax .

2. Press Address Book until New & Edit appears on the bottom

line of the display and press OK.

3. Press the left/right arrow until Group Dial appears and press OK.

4. Enter a group dial number between 0 and 99 and press OK.

5. Enter a speed dial number and press OK.

6. Press OK when speed dial information appears correctly.

7. Press OK when Yes appears.

8. Repeat steps 5 and 6 to include other speed dial numbers into the

group.

9. When you have finished, press the left/right arrow to select No at the

Another No.? prompt and press OK.

10.Press Stop/Clear to return to ready mode.

Editing a group dial number

You can delete a specific entry from a group or add a new number to the

selected group.

1. Press Address Book until New & Edit appears on the bottom

line of the display and press OK.

2. Press the left/right arrow until Group Dial appears and press OK.

3. Enter the group dial number you want to edit and press OK.

4. Enter the speed dial number you want to add or delete and press

OK.

If you entered a new speed dial number, Add? appears.

If you enter a speed dial number stored in the group, Delete?

appears.

5. Press OK to add or delete the number.

6. Press OK when Yes appears to add or delete more numbers and

repeat steps 4 and 5.

7. When you have finished, press the left/right arrow to select No at the

Another No.? prompt and press OK.

8. Press Stop/Clear to return to ready mode.

Using group dial numbers

To use a group dial entry, you need to search for and select it from

memory.

When you are prompted to enter a fax number while sending a fax,

press Address Book . See below.

Before beginning to store fax numbers, make sure that your machine

is in Fax mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 3210 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 3210

Xerox WorkCentre 3210 User Manual - German - 153 pages

Xerox WorkCentre 3210 User Manual - Dutch - 148 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xerox WorkCentre 3210 Manual

Product: