610742
28
Zoom out
Zoom in
Previous page
1/140
Next page
Getting started_27
Locating the WorkCentre 3210 or WorkCentre 3220
IP Address
1. Press Menu on the control panel, until you see Network on the
bottom line of the display.
2. Press OK to access the menu.
3. Press the left/right arrow until Network Info. appears and press OK.
4. Print appears and press OK.
5. Press the left/right arrow to select Yes and press OK.
The Network Configuration page prints out.
6. On the Network Configuration page note the IP Address (Example
169.123.21.23)
Accessing CentreWare Internet Services (CWIS)
1. On your PC open a web browser such as Internet Explorer.
2. In the URL or Address field enter http;//xxx.xxx.xxx.xxx where x is your
IP address and click Go to access the web site of your machine.
3. Select a tab to view.
Configuring network protocol via the machine
You can set up TCP/IP network parameters, follow the steps listed below.
1. Make sure your machine is connected to the network with an RJ-45
Ethernet cable.
2. Make sure you have turned on the machine.
3. Press Menu on the control panel, until you see Network on the
bottom line of the display.
4. Press OK to access the menu.
5. Press the left/right arrow until TCP/IPv4 appears and press OK.
6. Press the left/right arrow until Static appears and press OK.
7. Press the left/right arrow until IP Address appears and press OK.
Enter a byte between 0 and 255 using the number keypad and press the
left/right arrow to move between bytes.
Repeat this to complete the address from the 1st byte to the 4th byte.
8. When you have finished, press OK.
Repeat steps 9 and 10 to configure the other TCP/IP parameters:
subnet mask and gateway address.
9. If you would like to turn on IPv6 repeat step 3. to 4.
10.Then press left/right arrow until IPv6 appears and press OK.
11.Press the left/right arrow until On appears and press OK.
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1. Press Menu on the control panel, until you see Network on the
bottom line of the display.
2. Press OK to access the menu.
3. Press the left/right arrow until Ethernet Speed appears and press OK.
4. Press the left/right arrow until the speed you want appears and press
OK.
5. Press Stop/Clear to return to ready mode.
Restoring the network configuration
You can return the network configuration to its default settings.
1. Press Menu on the control panel, until you see Network on the
bottom line of the display.
2. Press OK to access the menu.
3. Press the left/right arrow until Clear Setting appears and press OK.
4. Press OK when Yes appears to restore the network configuration.
5. Power the machine off and back on.
Printing a network configuration page
The Network Configuration page shows how the network interface card on
your machine is configured.
1. Press Menu on the control panel, until you see Network on the
bottom line of the display.
2. Press OK to access the menu.
3. Press the left/right arrow until Network Info appears and press OK.
4. Press OK when Yes appears.
The Network Configuration page prints out.
Using SetIP program
This program is for the network IP setting using the MAC address which is
the hardware serial number of the network printer card or interface.
Especially, it is for the network administrator to set several network IPs at
the same time.
Installing the program
1. Insert the driver CD provided along with your machine. When the driver
CD runs automatically, close the window.
2. Start Windows Explorer and open the X drive. (X represents your CD-
ROM drive.)
3. Double click Application > SetIP.
4. Open the folder of the language you plan to use.
5. Double click Setup.exe to install this program.
6. Follow the instruction on the window to complete the installation.
Starting the program
1. Print the machine's network information report which includes your
machine’s MAC address. See "Printing reports" on page 61.
2. From the Windows Start menu, select All Programs > your printer
driver name > SetIP > SetIP.
Contact the network administrator if you are not sure how to configure.
You can also set up the network settings through the network
administration programs.
CentreWare Internet Services: Web-based printer management
solution for network administrators. CentreWare Internet
Services provides you with an efficient way of managing network
devices and lets you remotely monitor and troubleshoot network
machines from any site with corporate internet access.
CentreWare Internet Services: Web server embedded on your
network print server, which allows you to:
- Configure the network parameters necessary for the machine to
connect to various network environments.
- Customize machine settings.
SetIP
: Utility program allowing you to select a network interface
and manually configure the IP addresses for use with the TCP/IP
protocol. See "Using SetIP program" on page 27.
You can only use SetIP program when your machine is connected
to a network.
The following procedure is based on the Windows XP operating
system.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 3210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 3210 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 3210

Xerox WorkCentre 3210 User Manual - German - 153 pages

Xerox WorkCentre 3210 User Manual - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info