610742
10
Zoom out
Zoom in
Previous page
1/140
Next page
Safety_9
Safety
Read these safety notes carefully before using this product to
ensure you operate the equipment safely.
Your Xerox product and supplies have been designed and tested
to meet strict safety requirements. These include safety Agency
approval, and compliance to established environmental
standards. Please read the following instructions carefully before
operating the product and refer to them as needed to ensure the
continued safe operation of your product.
The safety testing and performance of this product have been
verified using Xerox materials only.
WARNING: This WARNING mark alerts users to
the possibility of personal injury.
WARNING: This WARNING mark alerts users to
heated surfaces.
CAUTION: This symbol indicates a Laser is being
used in the equipment and alerts the user to refer
to the appropriate safety information.
WARNING: This product must be connected to a
protective earth circuit.
Operator Accessible Areas
This equipment has been designed to provide operator access to
safe areas only. Operator access to hazardous areas is
restricted using covers or guards, which require a tool to enable
removal. Never remove these covers or guards.
Maintenance Information
1. Any operator product maintenance procedures will be
described in the user documentation supplied with the
product.
2. Do not carry out any maintenance on this product which is
not described in the customer documentation
WARNING: Do not use aerosol cleaners. Aerosol
cleaners can be explosive or flammable when
used on electromechanical equipment.
3. Use supplies and cleaning materials only as directed in the
Operator section of this manual.
4. Do not remove covers or guards that are fastened with
screws. There are no parts behind these covers that you
can maintain or service.
Operational Safety Information
Your Xerox equipment and supplies have been designed and
tested to meet strict safety requirements. These include safety
agency examination, approval, and compliance with established
environmental standards.
To ensure the continued safe operation of your Xerox equipment,
follow these safety guidelines at all times:
Do These:
Always follow all warnings and instructions that are marked
on or supplied with the equipment.
Before cleaning this product, unplug the product from the
electrical outlet. Always use materials specifically
designated for this product, the use of other materials may
result in poor performance and create a hazardous situation.
WARNING: Do not use aerosol cleaners. Aerosol
cleaners can be explosive or flammable when
used on electromechanical equipment.
Always exercise care when moving or relocating equipment.
Please contact your local Xerox Service Department to
arrange relocation of the copier to a location outside of your
building.
Always locate the machine on a solid support surface (not on
plush carpet) that has adequate strength to support the
weight of the machine.
Always locate the machine in an area that has adequate
ventilation and room for servicing.
Always unplug this equipment from the electrical outlet
before cleaning.
NOTE: Your Xerox machine is equipped with an energy saving
device to conserve power when the machine is not in use. The
machine may be left on continuously.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox WorkCentre 3210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox WorkCentre 3210 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox WorkCentre 3210

Xerox WorkCentre 3210 User Manual - German - 153 pages

Xerox WorkCentre 3210 User Manual - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info