Overview
Xerox® WorkCentre® 3025
User Guide
28
Overview
This chapter identifies the key settings that you can customize to meet your requirements. Changing
these settings is easy and will save you time when using the machine.
Note: Some options may be unavailable depending on your machine configuration.
Installation Wizard
1. On initial power on the Installation Wizard runs, the Language menu displays.
2. Press the up/down arrows to select the required language and press OK.
3. The Format Date menu displays. Press the up/down arrows to select one of the following and
press OK:
• MM/DD/YYYY
• DD/MM/YYYY
• YYYY/MM/DD
4. The Set Date menu displays.
a. Enter the date using the keypad or press the up/down arrows to increase or decrease the
value shown on the screen.
b. Press the Left/Right arrow buttons to move from one section of the date to another.
c. When you have entered the date press OK.
5. The Format Time menu displays. Press the up/down arrows to select one of the following and
press OK:
•12 Hour
•24 Hour
6. The Set Time menu displays. Enter the time and press OK.
7. The Metric Defaults menu displays. Press the up/down arrows to select one of the following and
press OK:
•Inches
•mm
8. The Default Paper Size menu displays. Press the up/down arrows to select one of the following
and press OK:
•Letter
•A4
9. The Allow Upgrade menu displays. Select Yes or No and press OK.
10. The Admin Passcode menu displays. Select Yes or No and press OK. If you select Yes, enter a
value on the SetAdminPasscode menu and CfmAdminPasscode menu.
11. The Customer Support menu displays.
a. Press the up/down arrows to select Enter Cust. Support #.