657829
163
Zoom out
Zoom in
Previous page
1/194
Next page
Xerox Travel Scanner 150
User’s Guide
163
Paper Pickup Options
The Paper pickup options allow you to choose how the scanner responds when a page is inserted into the scanner.
Delay—this is the amount of time between when the paper sensor is engaged and the rollers start to feed the
page into the scanner. When the TWAIN interface is open, or when automatic scanning is disabled, the page is
pre-fed and then the scanner waits until you click Scan in the interface before it will continue to feed and scan
the page. When automatic scanning is enabled and the TWAIN interface is closed, the scanner will
automatically feed and scan the page using the settings in OneTouch.
Increasing the delay time allows you to make sure the page is in straight before the scanner starts to feed it
through. If the delay time is 0 ms (milliseconds), the scanner starts as soon as the paper sensor detects that a
page has been inserted. You can set the delay time between 0 milliseconds (no delay) and 1250 milliseconds
(1.25 seconds).
Note that automatic scanning is only available when OneTouch is installed. Please refer to the Application
Settings section for instructions to enable or disable automatic scanning.
Insertion depth—this is how far into the scanner the page is pre-fed after the paper sensor has been
engaged.
Skew Detection
By default, the scanner is set to detect when the item being scanned is at an angle, also called skewed. It will stop
scanning and back the item out of the scanner. Click on Enable the detection of excessive document skew. Back
out the document if this occurs.
Calibrating and Cleaning
The scanner needs to be calibrated as part of your monthly maintenance of the scanner. You calibrated the scanner
on installation of the software, but the scanner requires calibration to maintain image quality. If the scanner is used
daily you may need to calibrate the scanner more often.
If calibration does not resolve any image quality issues you are seeing, you may need to clean the scanner.
1. Click on the Calibrate or Clean button to start the utility.
2. When prompted, insert the calibration page with the black strip face down. Or, if you started a cleaning utility,
insert the cleaning page.
3. The scanner will grab the page and move it back and forth as the utility completes the process.
4. When prompted, remove the page from the scanner.
If you completed a calibration, the last calibrated field will update with the current date and time.
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox Travel Scanner 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox Travel Scanner 150 in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox Travel Scanner 150

Xerox Travel Scanner 150 User Manual - German - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info