536434
33
Zoom out
Zoom in
Previous page
1/144
Next page
Installation and Setup
Xerox
®
Phaser
®
3610 Black and White Printer 33
User Guide
4. To enable the wireless network adapter, disconnect the Ethernet cable from the printer.
Note: Only one network connection can be active. During power on, if a network cable is detected, it
is enabled and the wireless network adapter is disabled.
5. Turn on the printer.
6. In the Admin Menu, configure the Wi-Fi settings. For details, see the System Administrator Guide at
www.xerox.com/office/WC3615docs.
Removing the Wireless Network Adapter
1. Turn off the printer.
2. Unscrew the thumbscrew on the back of the left door, then open the left door.
3. Locate the plastic latch release on the wireless network adapter that protrudes through the back of
the chassis.
4. To remove the wireless network adapter, reach into the chassis and push inward, then back on the
latch release.
CAUTION: Do not use force to pull on the wireless network adapter. If the latch is released properly,
the adapter pulls out easily. Pulling on the adapter can damage it.
5. Close the left door, then on the back of the door, screw in the thumbscrew.
6. Connect the printer to your computer with a USB cable or through the network using an Ethernet
cable.
7. Turn on the printer.
Resetting Wireless Settings
If the printer was previously installed in a wireless network environment, it could retain setup and
configuration information.
To prevent the printer from attempting to connect to the previous network, reset the wireless settings.
For details on resetting or connecting to a wireless network, see the System Administrator guide at
www.xerox.com/office/WC3615docs.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox Phaser 3610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox Phaser 3610 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox Phaser 3610

Xerox Phaser 3610 User Manual - German - 136 pages

Xerox Phaser 3610 User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info