657832
25
Zoom out
Zoom in
Previous page
1/90
Next page
Xerox Mobile Scanner
User’s Guide
25
Android
®
Devices (Smartphones and Tablets)
You can connect the scanner to an Android mobile technology based Smartphone or tablet and scan directly to the
device's memory card.
Before proceeding, please note the following requirements for scanning:
Scanning to a mobile device using a USB cable is only supported when the phone or tablet is able to be used as
a disc drive.
To test this function for your device, attach it to your computer using its USB cable. If the device is detected as
a disc drive you should be able to scan directly to it when it is attached to the scanner. If it is not detected as a
disc drive, you will not be able to attach it to the scanner and scan. However, as indicated in the
troubleshooting steps in this section of the user guide, the device may have several USB connection options
(including auto-sync, disc drive, and charging). Please refer to your device’s user documentation for
information about the USB connection types.
An external memory card must be installed in the mobile device for the scanner to detect it as a storage device.
Tip: the scanner automatically powers off after 2 minutes to conserve battery power. Tap the function button
occasionally to keep the scanner powered on while initiating the connection between your mobile device and the
scanner.
Note: If a memory card is in the scanner, remove it before proceeding with these instructions.
1. Connect the phone’s USB cable to the phone.
2. Connect the other end of the USB cable to the USB port in the back of the scanner.
3. Turn on the scanner.
The LEDs on the scanner will flash until the phone is properly detected as a USB flash drive.
4. Your phone should now prompt you to choose the USB connection type. On your phone choose the USB
connection type to mount it as a disc drive.
This is the same prompt you would receive when you plug your phone into a computer with a USB cable. If you
do not see this prompt, refer to the troubleshooting steps below.
5. The LEDs on the scanner will stop flashing when the phone is properly set and detected as a USB storage
device. When the scanner is ready to scan, a single LED will be lit next to the currently selected scan function.
6. Tap the function button on the scanner to cycle through the scan options until the LED is lit next to the option
you want to use to scan.
Scans in color at 300dpi and creates a JPG (*.jpg) file.
Scans in black & white at 300dpi and creates an Adobe PDF (*.pdf) file.
Scans in color at 300dpi and creates an Adobe PDF (*.pdf) file.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox Mobile Scanner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox Mobile Scanner in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox Mobile Scanner

Xerox Mobile Scanner User Manual - German - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info