484153
30
Zoom out
Zoom in
Previous page
1/211
Next page
Xerox DocuMate 4790
User’s Guide
30
Before You Begin
Please make sure of the following before you begin installation:
If you are prompted to reboot during installation, please select "No". Finish installing the rest of
the software, then close all open windows and reboot your computer.
Once you have plugged in your scanner, you may be notified that Windows needs to install driver
software for your scanner. If so, click on "Locate and install driver software (recommended)" and
follow any resulting instructions.
The information in this guide may cover software not provided with the scanner you purchased.
Please disregard any information about the software not applicable to your scanner. Visit our web
site at www.xeroxscanners.com for the latest software updates for your Xerox scanner.
If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or
messages during installation asking you to allow the installation to proceed. Although the
messages will differ based on the software your computer is running, in each case you should
allow the installation to proceed if that option is available. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your scanner, but if you do, make sure to turn
it back on again when installation is finished.
If you already have a scanner connected to your computer, it is recommended that you remove
that scanner’s driver program prior to installing your Xerox scanner. You can remove these
programs from the Windows Control Panel. Please refer to the user manual provided with your
other scanner hardware for instructions about removing the driver and software for that unit.
If your computer is running Windows Vista or Windows 7, you may see the Windows User Account
Control screen asking you to confirm system changes. Click the Continue button to allow the
installation to proceed.
The Windows User Account Control (UAC) must be turned off prior to installing the Kofax VRS or
Kofax Scan Demo software. The Kofax VRS installer will display a message stating "User Account
Control is enabled on this machine. The VRS installer will not install correctly with this setting
enabled. Please disable this setting from the User Accounts dialog in the Control Panel." The Kofax
Scan Demo installer will display a message stating "Cannot find IC runtime. Install IC." Turn off
the Windows UAC to complete the installation of these two software applications. You can turn
UAC back on after the installation has completed.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox DocuMate 4790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox DocuMate 4790 in the language / languages: English as an attachment in your email.

The manual is 5,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox DocuMate 4790

Xerox DocuMate 4790 User Manual - German - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info