657819
177
Zoom out
Zoom in
Previous page
1/197
Next page
Xerox
®
DocuMate
®
4700
User’s Guide
177
Troubleshooting
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible problems:
Is a cable loose or not plugged in securely? Inspect all cable connections. Make sure all the cables are
plugged in securely.
Did you restart the computer after installing the software? If you didn’t restart the computer, it may not
have loaded all of the software files. Try restarting your computer.
Did you select another TWAIN source for acquiring images? If you use multiple TWAIN devices with your
computer, you may have selected another source for images. Start the PaperPort software and make sure
TWAIN: Xerox DocuMate 4700 is selected as your scanner.
Problem: Why does my scanner not function after performing a system restore on Windows?
The system restore process may have corrupted some of the driver components. It is recommended that you
reinstall your scanner driver.
Problem: Why won’t my scanner buttons work after scanning with Windows Image Acquisition (WIA)?
After performing a scan using the WIA interface you must close the application you were using before scanning with
the buttons on the scanner.
Problem: Why won’t my scanner work after the computer has been sitting idle for several hours?
To resolve the problem, simply turn off the scanner power then turn it back on again.
This may occur after Windows goes into power saving mode to “hibernate” the computer into a low power state.
When you move your mouse or type on the keyboard it “wakes” the computer back up and restores full power to the
system. This power fluctuation during the computer’s hibernating period may sometimes cause the scanner to lose
communication to the computer.
Problem: I got the error message: PaperPort cannot allocate enough memory to perform internal critical operations.
Close any other active applications so that additional memory is available. If you click Continue, PaperPort moves
the file to the PaperPort data directory and renames the file with the prefix “bad.” This allows you to recover the file
later. To recover the file, import it into PaperPort by using the Import command in the File menu.
Problem: The installation will not complete successfully. If installation finishes, the scanner’s One Touch options do
not seem to work properly.
A likely cause is that some driver programs are already installed on your computer for another scanner. They are
interfering with the installation and One Touch options, and you need to remove those other drivers and re-install
your Xerox DocuMate 4700 scanner. Please see the documentation that you received with the other scanner for the
steps to remove its driver programs. After uninstalling the other scanner’s driver programs, uninstall One Touch using
the steps on page 180 then install One Touch following the instructions in the Installation chapter.
Problem: My computer keeps giving me out of hard drive space error messages.
The minimum requirement of 350MB free hard drive space is for the installation of the software and basic, low
resolution, scanning. High resolution scans result in files that can be over 1 gigabyte in size. Free up some space on
your hard drive for the software to be able to save the scanned images.
177


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xerox DocuMate 4700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xerox DocuMate 4700 in the language / languages: English as an attachment in your email.

The manual is 5,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox DocuMate 4700

Xerox DocuMate 4700 User Manual - German - 207 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info