Manual Xerox 4800 (page 33 of 46) (English)

31367

Zoom out

Zoom in

1/46

Three ways to scan

4800/2400 Series Installation and User Guide 2-23

3. If the dotted line is not exactly where you want it, put the

pointer on the line and drag the mouse.

For example, if you want the scan to include a border around

the image, you can drag the dotted line to be slightly larger

than the autotrimmed area.

To use the pointer to drag the line, make sure the pointer

button is selected at the top of the window.

4. When the trimmed area is what you want, click [Scan].

To manually set the output size for an item:

1. To scan the entire item on the glass, click [Same as Original].

No sections are trimmed.

2. To set the output size yourself, click [Same as Original] to

remove the checkmark.

The settings for the output size become active.

3. Put the pointer on the image and drag the mouse to enclose

the section you want in the scanned image.

As you drag the mouse, a dotted box appears on the image

and the size settings change to reflect the new output size

area. You can also type in the size settings boxes.

• Width and Height – The measurements of the final image

after it’s scanned; for example, if you plan to print the image

on a typical piece of paper, the width and height are 8.5 and

11.0 inches.

• Units – Units of measurement for the new area; click the

drop-down arrow and choose new units if you want.

• Resolution – The dots-per-inch (dpi) setting for the new

area.

• Scale – The amount of enlargement or reduction of the

image to fill the width and height measurements; for

example, if you select a small area and have set the width

and height to a paper size, the scale automatically increases

to enlarge the small image so it’s the same size as the

paper.

A new Scan Info box on the lower left portion of the Scan

Manager Pro shows the information for the new area.

You can select multiple areas. A new Scan Info box appears

for each one.

The following figure shows an example of a manually selected

area.

NOTE: When you manually select an area, the settings on the

other panels are for the selected area, not the whole image. For

example, the histogram on the resolution panel and the response

curve on the brightness and contrast panel refer to only your newly

selected area.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xerox 4800 in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xerox 4800

Xerox 4800 User Manual - German - 50 pages

Xerox 4800 User Manual - French - 50 pages

Xerox 4800 User Manual - Spanish - 49 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xerox 4800 Manual

Product: