706618

Xeoos X8 Manual

10
Zoom out
Zoom in
Previous page
1/15
Next page
Revised 10-006 Page 10 of 15
Starting the Fire
Fill Heat up Switch to Control of power output
[Upper combustion chamber] Twinfire
To start the fire, a small piece of wood can be used together with a regular lighter and kindling
which can be layered in the upper combustion chamber [ ]. For safety reasons fluid fuels are
categorically not allowed to be used.
To start the fire the control elements have to be put in the following positions [ ]:
Door handle: "Heat up" (see arrow)
Twinfire air control: "100 %" open (push all the way back)
Attention! The surface of the stove could be very hot.
As soon as the kindling has turned into a flame the permitted fuels can be put into the stove.
One should not put more than one to two small pieces [a total of approximately 3-4 pounds (1.5-
2 kg) in the upper combustion chamber. Until the necessary basic bed of fire is reached, the
Twinfire handle has to be in the "Heat up" position and the air control knob fully open [ ].
After about 30-45 minutes a blaze should have ignited so you can switch the handle to the
"Twinfire
®
" position [ ] (An indicator is that the firebox grate glows). The combustion occurs
primarily downwards through the flame.
Note: The Twinfire
®
system achieves its optimal effect only when it has
been burning for 30-45 minutes and there is enough fire bed with a temperature
of approx. 1,832°F (1,000°C) available. Otherwise there is a danger of smoke
development and smoldering. If there is no continuing flame in the lower com-
bustion chamber yet, put the handle in the position "Heat up" [ ].
Once the lower chamber flame has a continuing flame, the output can now be regulated with the
air control [ ], as necessary. The primary air supply should always be at least partly open
when the stove is running! This improves the quality of combustion and avoids any environmen-
tal pollution. The primary air also helps to prevent soot build-up in the pipe and chimney.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xeoos X8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xeoos X8 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xeoos X8

Xeoos X8 User Manual - German - 20 pages

Xeoos X8 User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info