684726
24
Zoom out
Zoom in
Previous page
1/42
Next page
24
EN
Error 6
Temperature sensor broken.
Repleace the temperature
sensor.
The charger is set for use of
the temperature sensor, but
the sensor isn’t present.
Change the charging
program (page 15).
Charger doesn’t work. No mains voltage.
- Measure the mains
voltage. It should be higher
then 180VAC (95VAC for
115VAC input).
- Have the internal fuse
checked by your dealer.
The Power LED lights, but
the charger doesn’t work
Mains voltage to low.
Measure the mains voltage.
It should be higher then
180VAC (95VAC for 115VAC
input).
The charger gives the
correct indication but the
battery is not chared. The
charger does not supply the
correct voltage (and
current).
The charger is busy with a
soft start.
3 minutes after switching on
the charger, the correct
charge level is indicated.
Oxidation of connectors
between battery and
charger.
Check the connectors and
replace if necessary.
Charger doesn’t deliver its
maximum charging current
Mains voltage to low.
Measure the mains voltage.
Below a voltage of 200VAC
(100VAC for 115VAC input)
the charger can’t deliver its
complete charging current.
Battery does not fill up. The
red or yellow LED continues
to burn
The battery is defective.
Measure the acid and, if
necessary, replace the
battery.
There are heavy consumers
connected to the battery.
Turn as many consumers as
possible or connect a
heavier charger to the
battery.
Battery is too heavy for the
charger.
Ask your supplier for advice.
The voltage you measure on
the connection terminals is
too high
The battery charger
automatically compensates
for the voltage drop over the
connection cables.
Measure the voltage on the
battery terminals.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq TBC 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq TBC 600 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info