684717
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
EN
The PB and IPC converters are galvanic isolated. This means that
you can connect any loading without worrying about the
interruption from input to the output, they aren’t directly
connected. Parallel operation of the same types gives great
flexibility to expand the power whenever is needed.
INST R U C TION S
Mounting
The converter has to be mounted in a space that complies with
the following:
- Leave enough space on all sides of the converter (min. 5 cm.)
for air circulation. In addition, make sure that there are
ventilation vents.
- The optimum ambient temperature is between 15ºC and
25 ºC.
- Mount the converter in a dry place where there is no chance of it
being affected by moisture or dirt.
- Keep the converter out of the reach of children.
- A working converter produces a dangerous voltage.
- Do not use the converter in places where gases are released or
flammable materials are stored.
- It is normal that the converter case is warm when there is a load.
- The converter is not suitable for outdoor use.
Connection
1. The input of the converter is fitted with a red and black cable
for connection to the battery. Connect the red cable to the
positive pole and the black cable to the negative pole of the
battery. Make sure that the correct cable is connected to the
correct pole. The converter will become defective if the poles
are reversed. In this case the reparation cost are not covered
by the guarantee.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq IPC 1205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq IPC 1205 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info