607640
16
Zoom out
Zoom in
Previous page
1/76
Next page
16
Cleaning and Disposal of Devices
To clean the Wireless Radiator Controller/Timer,
use only a dry or lightly damp cloth. Avoid chemical
solvents, as these may damage the device.
Adapters
Heimeier, Junkers Landys+Gyr,
MNG, Honeywell Braukmann
M30 x 1.5 thread
No adapter
required
Danfoss RAV (included pin
must be inserted into valve
tappet)
+ included pin,
only for RAV
Danfoss RA
Danfoss RAVL
Please completely remove all connecting pieces on
the plastic adapters before using any of the included
adapters.
Completely remove the connecting rods marked in
grey before installing the adapters.
Help
Problem Cause Solution
Batteries nearly
dead.
Replace the batteries.
Radiator
will not
heat up.
Water tempera-
ture in boiler
okay? Valve will
not open after
heat was off for
the summer
limescale
build-up?
Correct temperature of wa-
ter in boiler. Disassemble
the Radiator Controller.
Move valve tappet back
and forth multiple times by
hand or with a tool.
Radiator
will not
cool down
Valve is not clo-
sing completely.
The point where
your valve seal
closes may have
shifted.
Carry out adaptation again
(see “Adaptation”). Move
valve tappet multiple times
by hand adaptation may
not be possible because
your valve may have
limescale build-up or the
seal may no longer be
functioning.
Compres-
sion piece
fell out.
(This can
also cause
an E1
error.)
Because the
device has an
endless screw,
the compression
piece on the
bottom can
fall out if the
controller is not
mounted on the
valve.
Insert the compression
piece. Start the adaptation
process using the
MENU
item or by removing and
reinserting the batteries.
The endless screw rotates
and tightens the compres-
sion piece again. Mount
device on radiator and
perform adaptation again.
-
Pressing any button deletes the error shown
on the display and starts the adaptation
process again.
Adaptation not
possible. The
Wireless Radiator
Controller
/Timer
not mounted on
radiator.
Device correctly mounted
on radiator? Mount the
Wireless Radiator Control-
ler
/Timer.
Valve stroke too
short or battery
power too weak.
Open and close valve tap-
pet multiple times by hand
or insert new batteries.
Valve will not
move.
Can the valve tappet move
freely?
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xavax 111971 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xavax 111971 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info