608010

Xavax 111850 Radiator Thermostat Manual

15
Zoom out
Zoom in
Previous page
1/35
Next page
28 29
• Once the function is active, “LOC” will appear on the display.
• To deactivate the function, press both buttons again.
9. Setting the heating break
If the heating is being switched off for the summer, you
can save battery power. This involves opening the valve
up fully. Limescale protection measures remain in place.
• To activate the heating break, turn the setting wheel
clockwise during manual operation (Manu) until “ON”
appears on the display.
• To terminate the heating break, quit manual operation
(Manu) or turn the setting wheel anticlockwise.
10. Setting frost protection mode
If you do not want the room to be heated, the valve can
be closed. It will only be opened again if there is a risk of
freezing due to frost. Limescale protection measures re-
main in place.
• To activate frost protection mode, turn the setting wheel
anticlockwise during manual operation (Manu) until
“OFF” appears on the display.
• To terminate frost protection mode, quit manual opera-
tion (Manu) or turn the setting wheel clockwise.
11. “Window open” function
In the event of a signicant drop in temperature, the actu-
ator can automatically detect whether the room is being
ventilated. To save on heating costs, the temperature
is then automatically reduced for a specic time period
(factory setting: 15 minutes). While this function is active,
the “window open” symbol (
) appears on the display.
• Press and hold down the menu button for more than
3 seconds.
• Use the setting wheel to select the “AER” menu item.
• Conrm with OK.
• Use the setting wheel to set the temperature and time.
To deactivate the function, select a time of “0”.
12. Setting the offset temperature
The temperature is measured at the heating appliance it-
self, with the result that other parts of the room may be
warmer or colder than this. To allow for this, you can set
a temperature offset of ±3.5°C. If, for example, a temper-
ature of 18°C is measured somewhere within the room
instead of the 20°C set, it means that an offset of -2.0°C
needs to be congured.
• Press and hold down the menu button for more than
3 seconds.
• Use the setting wheel to select the “TOF” menu item.
• Conrm with OK.
• Use the setting wheel to modify the temperature.
• Press the OK button to conrm.
13. Restoring the factory settings
You can reset the actuator to its initial state manually. This
will clear all the settings that have been made manually.
• Press and hold down the menu button for more than
3 seconds.
• Use the setting wheel to select the “RES” menu item.
• Conrm with OK.
• “CFM” will appear on the display; press OK to conrm.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xavax 111850 Radiator Thermostat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xavax 111850 Radiator Thermostat in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info