608044
18
Zoom out
Zoom in
Previous page
1/42
Next page
17
3.5. Teach-out/Reset
The MAX! Eco Switch can be reset to the initial state
manually. Restoring the initial state deletes all settings and information about taught-in devices.
First remove the batteries from the battery compartment.
Wait 60 seconds.
Press and hold down the button at the top or bottom.
Re-insert the batteries at the same time.
Pr
ess and hold down the button until the device LED starts to ash. Release the button. The factory settings are restored.
3.6. LED ashing sequences and transmission behaviour
The LED’s ashing sequences have different meanings:
3.7. Mounting in existing switches
The MAX! Eco Switch is designed to t into frames supplied by the following manufacturers:
3.8. Technical data
Supply voltage:
3 V
Batteries: 2x LR03 (micro/AAA)
Battery life: 5 years approx.
Receiver frequency: 868.3 MHz
Receiver class: SRD Class 2
Typical range of transmission
in the open air: 100 m
Housing dimensions: 86 x 86 x 16.5 mm (W x H x D)
Subject to technical changes.
3.9. Safety instructions
This device is not a toy; do not allow children to play with it. Do not leave packaging material lying around, as it can be
dangerous in the hands of a child. Do not open the device: it does not contain any components that need to be serviced
by the user. In the event of an error, please return the device to our service department.
3.10. Note on environmental protection:
After the implementation of the European Directive 2002/96/EU and 2006/66/EU in the national legal system, the following
applies:
Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are
obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the
public collecting points set up for this purpose or point of sale. Details to this are dened by the national law of the
respective country. This symbol on the product, the instruction manual or the package indicates that a product is
subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are
making an important contribution to protecting our environment.
Hereby, Hama GmbH & Co. KG, declares that this 00111932 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. See www.hama.com for declaration of conformity according to R&TTE Directive
99/5/EC guidelines.
Flashing sequence Meaning
1x ash Conrmation following successful sending of the radio command
2x ashes Duty cycle has been exceeded. The longest period to wait before sending again would be an hour.
3x ashes Error message, radio command not sent successfully
Manufacturer Frame
Berker S.1, B.1, B.3, B.7 glass
ELSO Joy
GIRA System 55, Standard 55, E2, E22, Event, Espirit
merten 1-M, Atelier-M, M-Smart, M-Arc, M-Star, M-Plan
JUNG A 500, AS 500, A plus, A creation
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xavax 00111932 - MAX Starter Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xavax 00111932 - MAX Starter Kit in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info