Manual Xavax 00111932 - MAX Starter Kit (page 17 of 42) (English, German, Dutch, French, Spanish)

608044

Zoom out

Zoom in

1/42

3. Eco Switch Pushbutton

3.1. Intended use

The MAX! Eco Switch has a special job to do in the MAX! System. When you leave your house or apartment, all rooms

can be switched to manual mode and reduction temperature at the touch of a button. Similarly, when you return home, all

MAX! Components can be set to automatic operation at the touch of a button, thereby starting the separate weekly hea-

ting programs congured for each room. Communication between MAX! Components is bi-directional. This ensures that

the information sent reaches the recipient.

The MAX! Eco Switch is battery-operated. As such it is highly  exible where mounting and selecting a mounting location

are concerned. The MAX! Eco Switch is mounted and removed very easily using screws or adhesive strips. It is compa-

tible with a number of different surfaces including furniture, brick walls, tiles or glass. Holes or slits do not have to be chi-

selled out of brick walls. The frame supplied with the device can be used for wall mounting. It is also possible to integrate

the MAX! Eco Switch into existing switches, even if a  ush-mounting box is not already present. (See Section 10 for more

detailed information.) The device may only be operated indoors and must be protected from the effects of damp and dust,

as well as solar or heat radiation.

Using this device for any purpose other than that described in this operating manual does not fall within the scope of in-

tended use and shall invalidate any warranty or liability. This also applies to any conversion or modication work. This de-

vice is intended for private use only.

3.2. Overview

(A) Mounting plate

(B) Attachment frame

3.3. Inserting (replacing) batteries

• Once mounted, the pushbutton can easily be pulled out of the frame. To remove the pushbutton from the

frame, take hold of the sides of the pushbutton rocker and pull the pushbutton out. You do not need to re-

move the rocker or open the device.

• Turn the pushbutton over.

• After removing the old batteries , please wait approximately 60 seconds before inserting the new ones.

• Insert 2 LR03 (micro/AAA) batteries in the battery compartments (making sure that you insert them the

right way round).

• Put the pushbutton back into the frame.

3.4. Teaching-in on MAX! Components

In order to enable communication between MAX! Components, the devices have to be taught-in to one another.

• Start by switching the teach-in partner (e.g. the MAX! Cube) toteach-in mode.

• To activate teach-in mode, press and hold down one of the buttons on the MAX! Eco Switch for at

least 3 seconds. The LED  ashes in teach-in mode.

• Successful teaching-in of the MAX! Eco Switch is conrmed by the LED lighting up once. If you do

not teach-in any devices, the teach-in procedure deactivates automatically after 30 s.

The MAX! Eco Switch communicates with the MAX! Components only centrally via the MAX! Cube. If this central

interface fails, MAX! Components can no longer receive commands from the MAX! Eco Switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xavax 00111932 - MAX Starter Kit in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xavax 00111932 - MAX Starter Kit Manual

Product: