745607

Xaralyn Mystic Fires 15 series Manual

9
Zoom out
Zoom in
Previous page
1/36
Next page
II. Operation of Remote Controller and Control Panel
This replace includes a remote controller. Please ensure the remote
controller is used with batteries included. The remote controller
will not work when it is without batteries or batteries out of power.
Please direct the remote controller at the electric replace at 1-5
meters distance, otherwise the remote controller could not work
properly. Please point the remote controller to the relevant grid for
the required functions. Do not cover the receiver on the remote
controller.
There is one main power switch on the appliance and four buttons
on both control panel and remote controller of the replace.
When the cassette version is built in, there is a possibility that you
have to hold the remote higher for a good connection with the
receiver.
A. POWER SWITCH: This is a switch for main power of the electric replace, turn the switch to I
for power on. Once power is turned on, it comes with a crisp warning tone to warn the operator the
power supply has been connected. All the function operations will not start automatically. To turn
off the power, turn the switch to O.
Remote Control:
B. ON/OFF: Push the ON/OFF button once to turn on the internal electric source of replace.
Meanwhile, the indicator light is on and simulated log set is lit up. Please note it will take about 48
seconds to see the ame effect due to the mist generation process. The heater functions will not
turn on unless push the heating buttons. Push the ON/OFF button again to turn off the replace.
C. DIMMER+ and DIMMER-: Flame adjustment, dimmer+ for higher ame effect and dimmer- for
lower ame effect. This unit has the memory function, it keeps the record for last ame adjustment
when you use it next time. If you don’t see the ame after 48 seconds, please try to push dimmer+,
a few times.
D. LOW/HIGH: When the unit is under working condition, push the LOW button once, the heater
starts to work at low heating after a warning tone. Push the button again, the heater stops. Push
the HIGH button once, the heater starts to work at high heating after a warning tone. Push the
button again, the heater stops. When the unit is under low heating, push HIGH button will switch
from low heating to high heating.
E. Switch off the power if you leave the replace for a long time.
Fireplace Surface Cleaning
Use a cloth dampened with warm water only to clean painted surface of electric replace. Do not
use abrasive cleaners.
Service
Except bulb replacement, water rell, atomizer cleaning and surface cleaning, all the other clean-
ings or modication please contact its service agent.
CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN THE
FIREPLACE.
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xaralyn Mystic Fires 15 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xaralyn Mystic Fires 15 series in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info