670438
5
Zoom out
Zoom in
Previous page
1/8
Next page
Insert the battery into the quadcopter, the
battery slides into the holder from the front to
the back. Connect the battery up and place the
quadcopter on a flat level surface. The X250
LED’s will flash fast and then slow to a blink to
show the quadcopter is ready bind to the
handset.
Making sure the throttle control stick is
positioned downwards turn on the transmitter.
To activate the bind you have to move the throttle
control stick full forwards and then back to the
lowest position. On reaching the lowest position
you will hear and audible “beep” from the
transmitter and the LED’s on the quadcopter will
change from flashing to solid to show the
quadcopter is bound and ready to fly.
After any flight the battery should be
disconnected and removed from the quadcopter.
This should be a post flight habit to avoid any
unforeseeable problems.
Warning: If the LiPo battery is left connected in
the quadcopter for long periods if may become
damaged due to over-discharge or even
become a potential fire hazard.
Warning: If the AA batteries are left in the
transmitter for extended periods of time
potential leakage could occur which may
damage the transmitter and also create a
fire hazard.
After flight and removal of the battery turn off
the transmitter. If the transmitter is not going to
be used for a long time you should remove
and store the batteries.
Roll Trim
Adjustment
Channel
Information
Yaw Trim
Adjustment
Throttle Trim
Adjustment
Transmitter Battery Level
Pitch Trim Adjustment
Quadcopter LED Status
(on/off)
Short press – takes a photograph
Long press – Starts Video recording;
Long Press again stops and saves
the video
Direction control stick –
Elevator/Pitch and Aileron/Roll
Short press down – Roll/Flip
Long press down – Turn X250
LED lights on/off
Throttle control stick
and Rudder/Yaw
Press down to change
the rudder sensitivity
between 60% and 100%
Photo and Video functions are only
applicable when you have a 5.8GHz
Camera with a memory card connected.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for X250 XK Alien Quadcopter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of X250 XK Alien Quadcopter in the language / languages: English as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of X250 XK Alien Quadcopter

X250 XK Alien Quadcopter User Manual - English - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info